Datasheet Texas Instruments ADC12D1000CIUT

ManufacturerTexas Instruments
SeriesADC12D1000
Part NumberADC12D1000CIUT
Datasheet Texas Instruments ADC12D1000CIUT

12-Bit, Dual 1.0-GSPS or Single 2.0-GSPS Analog-to-Digital Converter (ADC) 292-BGA -40 to 85

Datasheets

ADC12D1x00 12-Bit, 2.0/3.2 GSPS Ultra High-Speed ADC datasheet
PDF, 3.6 Mb, Revision: N, File published: Aug 31, 2015
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin292
Package TypeNXA
Industry STD TermBGA
JEDEC CodeS-PBGA-N
Package QTY40
CarrierJEDEC TRAY (10+1)
Device MarkingADC12D1000CIUT
Width (mm)27
Length (mm)27
Thickness (mm)2.38
Pitch (mm)1.27
Max Height (mm)2.4
Mechanical DataDownload

Parametrics

# Input Channels2,1
Analog Input BW2800 MHz
ArchitectureFolding Interpolating
DNL(Max)0.4 +/-LSB
DNL(Typ)0.4 +/-LSB
ENOB9.6 Bits
INL(Max)2.5 +/-LSB
INL(Typ)2.5 +/-LSB
Input BufferYes
Input Range0.8 Vp-p
InterfaceParallel LVDS
Operating Temperature Range-40 to 85 C
Package GroupBGA
Package Size: mm2:W x L292BGA: 729 mm2: 27 x 27(BGA) PKG
Power Consumption(Typ)3380 mW
RatingCatalog
Reference ModeInt
Resolution12 Bits
SFDR71 dB
SINAD59.7 dB
SNR60.2 dB
Sample Rate(Max)1000,2000 MSPS

Eco Plan

RoHSSee ti.com

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: ADC12D1600RB
    12-Bit, Dual 1.6/1.8 GSPS or Single 3.2/3.6 GSPS A/D Converter Reference Board
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • AN-2128 ADC1xD1x00 Pin Compatibility (Rev. C)
    PDF, 60 Kb, Revision: C, File published: May 1, 2013
    In order to facilitate upgrading applications from a 10-bit Gig ADC to a 12-bit Gig ADC, the ADC10D1x00(ADC10D1500/ADC10D1000) is designed to be pin-compatible with the ADC12D1x00(ADC12D1800/1600/1000). This means that a single board layout may be designed with both resolutionADCs in mind for more cost efficient and time-to-market product development.
  • AN-2177 Using the LMH6554 as a ADC Driver (Rev. A)
    PDF, 1.7 Mb, Revision: A, File published: Apr 26, 2013
    This application report discusses the use of the Texas Instruments LMH6554 as an ADC driver.
  • From Sample Instant to Data Output: Understanding Latency in the GSPS ADC
    PDF, 392 Kb, File published: Dec 18, 2012
    For many applications which use ultra high-speed ADCs, latency can be a critical performance specification. For example, if the ADC is used in any kind of feedback loop, then the absolute latency is an important factor. For a MIMO system such as a phased array radar, the relative difference and variability in latency becomes important. This application note covers latency in the GSPS ADC products,
  • AN-2132 Synchronizing Multiple GSPS ADCs in a System: The AutoSync Feature (Rev. G)
    PDF, 169 Kb, Revision: G, File published: Feb 3, 2017
  • Maximizing SFDR Performance in the GSPS ADC: Spur Sources and Methods of Mitigat
    PDF, 720 Kb, File published: Dec 9, 2013
    The SFDR performance of an ADC is limited by the largest spur in the spectrum from DC to Fs / 2. These spurs can either be reduced or avoided entirely for maximum SFDR performance, based on the application. This reference design explores the reason behind spurs in the 10-bit and 12-bit GSPS ADCfamily. The specific products covered are: ADC12D1800RF, ADC12D1600RF, ADC12D1000RF, ADC12D800RF, ADC12

Model Line

Series: ADC12D1000 (2)

Manufacturer's Classification

  • Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > High Speed ADCs (>10MSPS)
EMS supplier