Datasheet Texas Instruments THS6093CPWPR
| Manufacturer | Texas Instruments |
| Series | THS6093 |
| Part Number | THS6093CPWPR |
275-mA, +12V ADSL CPE Line Driver with Shutdown 14-HTSSOP 0 to 70
Datasheets
200 mA +/- 12 V ADSL CPE Line Drivers datasheet
PDF, 1.2 Mb, Revision: C, File published: Oct 11, 2002
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 14 |
| Package Type | PWP |
| Industry STD Term | HTSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | HS6093C |
| Width (mm) | 4.4 |
| Length (mm) | 5 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Download |
Parametrics
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | Current FB |
| BW @ Acl | 100 MHz |
| CMRR(Min) | 55 dB |
| CMRR(Typ) | 63 dB |
| GBW(Typ) | 100 MHz |
| Input Bias Current(Max) | 10000000 pA |
| Iq per channel(Max) | 9.5 mA |
| Iq per channel(Typ) | 7.3 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 20 uV/C |
| Operating Temperature Range | -40 to 85,0 to 70 C |
| Output Current(Typ) | 275 mA |
| Package Group | HTSSOP |
| Package Size: mm2:W x L | 14HTSSOP: 32 mm2: 6.4 x 5(HTSSOP) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 600 V/us |
| Total Supply Voltage(Max) | 14 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 5 +5V=5, +/-5V=10 |
| Vn at Flatband(Typ) | 2.1 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 16 mV |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: THS6093EVM
THS6093 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Active Output Impedance for ADSL Line DriversPDF, 636 Kb, File published: Nov 26, 2002
Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Model Line
Series: THS6093 (6)
- THS6093CPWPR THS6093ID THS6093IPWP THS6093IPWPG4 THS6093IPWPR THS6093IPWPRG4
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)
