Wireless Audio Pioneer CSR Launches Portfolio of Soundbar Example Designs

CSR CSR8670 CSRA65700

CSR announces the launch of three wireless soundbar platform example designs which offer manufacturers complete and flexible solutions designed to rapidly bring entry-level, mid-range and high-end soundbars to market.

Market intelligence firm Research and Markets predicts the global soundbar market will increase at a CAGR of 28 per cent by 2018 [1]. By bringing together all the silicon technologies, software and configuration tools needed to support source-to-speaker processing for soundbar applications, CSR is enabling consumer electronics manufacturers and ODMs to capitalize on this rapidly growing market.

The requirements for features, performance, cost and conformance with power consumption regulations place a heavy burden on the development resource needs of a manufacturer entering or growing a portfolio of products for this market. The CSR soundbar platforms address this challenge by enabling the rapid development of differentiated products that provide consumers with a high fidelity audio experience that is simple to install, easy to operate and aesthetically pleasing in the modern digital home.

Entry-Level Soundbar Platform

By integrating the DSP, a microcontroller, analog and digital interfaces and wireless connectivity into a single SoC device, the CSR8670™ , the entry-level platform reduces the overall system complexity and bill of materials cost for the customer. This offers OEMs and ODMs a fast and simple solution for creating single-chip 2.0 or 2.1 channel soundbar designs. The entry-level design supports analog and digital inputs, audio decoding and post processing, a wireless subwoofer and Bluetooth® audio streaming, including support for the aptX® codec, from smartphones, tablets, PCs and laptops.

CSR CSR8670

When configured as a 2.1 channel soundbar system, the platform includes a subwoofer design that incorporates a dedicated wireless module based on the CSRA65700 ROM IC. This design works seamlessly with the CSR8670 in the soundbar to pass the extracted low frequency audio data over the Bluetooth link with a very low relative latency. The subwoofer design also enables playback of low frequency audio from an enclosure tuned to deliver an accurate reproduction of bass. As an alternative to the traditional infra-red remote control, a Bluetooth Smart remote unit can be used for functions including volume control and input selection.

CSR’s entry-level platform enables a complete wireless solution with all three Bluetooth links operating simultaneously from a single device.

Mid-Range Soundbar Platform

For the mid-range market, CSR has created a soundbar platform which allows for a more fully featured design while still reducing system complexity, development time and cost. The platform uses CSR’s feature rich MAPX7™ audio DSP which enables multiple decoding and post processing options for a truly immersive listening experience; whether using CSR’s meloD® suite or third party processing such as Dolby or DTS. The MAPX7™ DSP and CSR8670 Bluetooth device featured in the platform design provide a wide variety of input connectivity options. Bluetooth audio streaming and support for the aptX codec, analog and digital wired audio inputs are supported together with a 2 input/1 output HDMI interface option. The design also features a Bluetooth connection to the subwoofer containing the CSRA65700™ ROM IC.

The out-of-the-box design from CSR supports a 3.1 configuration which provides speaker drive for left, right and center channels along with the wireless subwoofer output. This arrangement can be readily expanded up to a 7.1 configuration for the ultimate audio experience.

The mid-range platform has been designed with power economy firmly in mind, achieving standby power of less than 500 mW. Convenient features for consumers such as wake up from standby and NFC pairing have also been included.

High-End Soundbar Platform

The high-end soundbar platform with high resolution audio support is derived from the mid-range platform through use of the MAPX8™, a pin-for-pin replacement of the MAPX7 device. The MAPX8 enables full support for a broad range of high resolution audio decoders and post-processors from providers such as Dolby and DTS, delivering the utmost quality, resolution and multi-channel listening experience for the discerning consumer.

Availability

The entry level, mid-range, and high-end soundbar platforms are available now. For all platforms, CSR provides complete design information, including example design kits, schematics, bill of materials (BOM) and PCB layout files. Configuration files are also provided, together with a comprehensive tool set to help customers to adjust the performance to their own needs. For more information please visit the website.

Product details

Key features of the entry level Soundbar Platform (DK-MOZART-10195-1B (ELSB)) are:

  • Bluetooth
    • A2DP (SBC, mp3, AAC, aptX options)
    • AVRCP
    • Wireless Subwoofer (SWAT)
  • 2.1 channel outputs
  • Basic Post Processing
  • Standby power <500 mW
  • Analog Input
  • USB input (USB device)
  • Optical SPDIF input
  • Dolby Digital decoding (optional)
  • IR or Bluetooth Smart Remote control

The mid-range (DK-BEETHOVEN-10194-1B (MRSB)) and high-end Soundbar Platforms (DK-HDSB1.1-10228-1A – HD Soundbar (HDSB)) include the following features:

  • Bluetooth
    • A2DP (SBC, mp3, AAC, aptX options)
    • AVRCP
    • Wireless Subwoofer (SWAT)
    • NFC pairing
    • 3.1 channel output
  • Standby power <500mW
  • Wake up from standby
  • HDMI inputs and output (optional)
  • Analog and SPDIF inputs
  • Audio playback from USB stick
  • Advanced Post Processing
  • Lip-Sync Audio Delay
  • Dolby/DTS decoding (optional)
  • IR control with IR learning
  • LCD Display or LED User Interface support

1) Research and Markets - Global Soundbar Market 2014-2018

You may have to register before you can post comments and get full access to forum.
EMS supplier