Processor Board Embest LPCEB2000-S

LPCEB2000-S is an industrial-oriented processor board designed around Philips LPC2129/2114/2119/ 2124/2194 ARM7TDMI-S, 32-bit, 60MHz microcontroller.

Detailed Description

This board has various peripherals which are accessible via pin-headers on the edge, that means you have tremendous flexibility to extend the system to interface with your peripherals. User can embed this processor board in your design, and form a complete hardware system, it will speed your development process and reduce the product cost.

Embest LPCEB2000-S Processor Board

Features

  • Dimensions: 65 × 61 mm
  • Temperature: -45 to +85 Celsius
  • LPC2129 CPU, 32bit, 60 MHZ, 256KB internal flash, 16KB SRAM. Can be replaced with LPC2114/2119/2124/2194 CPU.
  • A 10MHz Crystal for CPU
  • Powered with a regulated 5V DC using the on-board 1.8V and 3.3V regulators.
  • Power status indicator LED (D2)
  • A Jtag enable/disable jumper
  • J1 and J2 Connector, both use 0.1 spacing, 0.025 square inch straight pin headers. J1 is 20×2 Pins, J2 is 10×2 Pins.


LPCEB2000-I Development Board for LPCEB2000-S
The LPCEB2000-S can plug onto LPCEB2000-I Development Board via J1 and J2 connector header when developing. LPCEB2000-I Development Board expand the two UART to RS-232 drivers, provides connections to 1 CAN port(only for LPC2119/2129/2194), 4x4 keyboard, 2-channel PWM output(one is output to a buzzer, the other is to PWMDAC), 2-channel AD sampling input, I2C bus, 8-digit 8-segment LED display, Analog signal output to a speaker, 20 PIN standard JTAG port and 1 reset button. Plenty of software examples(all in source codes) also provided with the LPCEB2000-I Development Board. With the LPCEB2000-I Development Board, you can develop the LPCEB2000-S quickly.

LPCEB2000 Schematic Diagram

LPCEB2000-S Schematic Diagram

armkits.com

Other Names:

LPCEB2000S, LPCEB2000 S

You may have to register before you can post comments and get full access to forum.
EMS supplier