Evaluation Board Embest S3CEV40
- ARM7 Development Board based on Samsung S3C44B0 Microcontroller
- 10 BaseT, USB, 2 RS232, LCD, IDE, Keyboard, Jtag,...
- Boot Code, ucLinux, uCos
Embest S3CEV40 evaluation board is a platform that is suitable for code development of Samsung's S3C44B0X 16/32-bit RISC microcontroller (General ARM) for hand-held device and general applications.
Detailed Description
The S3CEV40 board consists of S3C44B0x processor, boot Flash, SDRAM, LCD&TSP touch screen interface, two serial communication ports, ethernet interface, USB interface, keyboard interface, IIS(sound) interface, exterior IDE port, Nand Flash, RTC, JTAG interface and 8-SEG.
Embest S3CEV40 EVB provide a high performance and low cost solution for embedded engineers.
S3C44B0X consists of 16-/32-bit RISC (ARM7TDMI) CPU core, 8KB cache, optional internal SRAM, LCD controller (up to 256 color DSTN), 2-ch UART with hand-shake (IRDA1.0,16-byte FIFO), 4-ch DMA, System manager (chip select logic, FP/ EDO/SDRAM controller), 6-ch timers with PWM, 71-bit general purpose I/O ports, RTC, 8-ch 10-bit ADC, IIC-BUS interface, IIS-BUS interface, Sync. SIO interface and PLL for clock.
Hardware Specification
- Dimensions: 190 × 190 mm(main board)
- S3C44B0 processor, ARM7TDMI core, 66MHz work frequency
- 5.0V DC or USB power supply
- 2 M bytes 16-bit Flash
- 8 M bytes 16-bit SDRAM
- 4K bit EEPROM with IIC BUS
- 2× RS232
- USB connecter
- 10M Ethernet interface connector
- microphone import
- IIS audio frequency export (speaker out)
- 16 M Bytes Nand Flash
- external IDE port
- LCD&TSP touch screen port
- 320×240 LCD * (optional)
- 4×4 keyboard * (optional)
- Reset button
- 2 interrupt buttons and 2 LEDS
- 8 segment leds
- 20-pin JTAG interface connector
- 4 groups 2×20 PIN expansion connectors of CPU
Software Specification
- Boot software
- Samples codes and test software(All in source code)
- learning example for arm assemble instructions
- learning example for running arm processor in different operating mode
- learning example for arm thumb instructions
- learning example on how to operate with interrupt
- IIS sounds test program
- Test porgram for 8_segment Led, to light as 1,2,3,...
- Test program for using RTC
- Test program on how to access memory
- Test program to lighting LED, showing how to use GPIO
- Test Program for reading/writing flash chip
- Test program about Timer
- Test program about UART
- Test program for keyboard operation
- Test program for LCD display, both showing text and graphics
- Test porgram on how to use touch screen
- A network application to test Ethernet port
- DHCP protocol test program
- ... ...
- uCos BSP (uC/OS-II needs to be licensed if used commercially, please contact Micrium)
- uClinux source tree(porting for this board)
Packing List
- Embest S3CEV40 Evaluation Board
- a DB9 plug-to-DB9 socket straight-through serial cable
- 5.0V DC Power supply
- USB cable
- CD-ROM, include:
- user manual
- circuit schematic drawing
- Boot software
- samples code and test software
- uCos BSP (uC/OS-II needs to be licensed if used commercially, please contact Micrium)
- uClinux source tree
This S3C44b0X development board is capable of supporting different kinds of debugging systems, using an ICE interface.
