Evaluation Board Embest S3CEB2410

  • ARM9 Evaluation Board based on Samsung S3C2410X (ARM920T) Processor
  • 10 BaseT, USB host/device, LCD, MMC, Jtag,...
  • Embedded Linux, WinCE

Embest S3CEB2410 evaluation board is a development platform based on Samsung S3C2410X processor.

Detailed Description

The S3C2410X consists of 16-/32-bit RISC (ARM920T) CPU core, separate 16KB instruction and 16KB data cache, MMU to handle virtual memory management, LCD controller (STN & TFT), NAND flash boot loader, System Manager (chip select logic and SDRAM controller), 3-ch UART, 4-ch DMA, 4-ch Timers with PWM, I/O ports, RTC, 8-ch 10-bit ADC and touch screen interface, IIC-BUS interface, IIS-BUS interface, USB host, USB device, SD host & multimedia card interface, 2-ch SPI and PLL for clock generation. Embest S3CEB2410 evaluation board realizes all functions of S3C2410X processor, user can easily engage in development in this platform, or use it as reference to application development.

Embest S3CEB2410 Evaluation Board

Hardware Specification

  • Dimensions: 190 × 140 mm (main board)
  • Processor: S3C2410x ARM920T(272FBGA)
  • System power supply: board uses +5V, 2A DC transformer, which regulates the voltage to +3.3V internal supplies to CPU’s I/O and peripheral components. In additional, provide two independent +1.8V on-board transformers to supply power to CPU kernel, user can switch CPU to save mode through program control.
  • System clock: 12MHz external crystal oscillator, 200MHz+ CPU internal FD
  • Boot ROM:
    • Intel Strata Flash : E28F128J3A 16MBytes
    • ATMEL 2Mbytes NOR FLASH AT49BV1614A
    • Samsung Nand Flash 32M Bytes (Smart Media Card)
  • SDRAM: 64Mbytes (32Mbytes×2)
  • RTC (real time clock)
  • 3 channel UART (including IrDA interface)
  • 2-channel USB HOST and 1-channel USB DEVICE
  • Smart Media Card interface
  • SD host (MMC) interface
  • TFT/STN LCD and touch panel interface
  • IIC bus EEPROM
  • IIS interface (sound codec audio input/output)
  • SPI interface
  • 8-channel 10bit ADC modular transfer interface
  • 10M Ethernet interface
  • 4 touch buttons for external interrupt or I/O input
  • 4 LED indicators and 2 power indicators
  • 20-pin JTAG interface
  • EXBUS full expansion interface
  • 640×480 TFT Color LCD and Touch panel (Option)

Software Specification

  • Samples codes and test software(All in source code)
    • ADC function test
    • S3C2410 CACHE function test
    • DMA function test
    • NorFlash write routine
    • IIC interface use routine
    • IIS interface use routine
    • External interrupt use routine
    • IrDA interface use routine
    • NAND Internal RAM test routine
    • LCD use routine
    • MMU function test routine
    • PLL function use routine
    • Processor working mode test routine
    • Processor real-time test routine
    • SD card interface use routine
    • Smart Media Card interface use routine
    • SPI interface use routine
    • Internal timer test routine
    • Touch panel interface use routine
    • Serial port use routine
    • USB communication test routine
    • ... ...
  • WinCE4.2 BSP
  • Embedded linux source tree(porting for this board)

Packing List

  • Embest S3CEB2410 Evaluation Board
  • serial cable
  • 5.0V DC Power supply
  • USB cable
  • Network cable
  • CD-ROM, include:
    • user manual
    • circuit schematic drawing
    • samples code and test software
    • WinCE4.2 BSP
    • Embedded linux source tree

armkits.com

You may have to register before you can post comments and get full access to forum.
EMS supplier