Datasheet Texas Instruments CC430F6126IRGCR

Manufacturer	Texas Instruments
Series	CC430F6126
Part Number	CC430F6126IRGCR

Datasheets

Prices

Status

Packaging

Eco Plan

Design Kits & Evaluation Modules

• Evaluation Modules & Boards: MSP-SA430-SUB1GHZ
  Sub-1 GHz RF Spectrum Analyzer Tool
  Lifecycle Status: Active (Recommended for new designs)
  
  • Download

Application Notes

• Download
  CC430 Wake-On-Radio Functionality (Rev. A)
  PDF, 210 Kb, Revision: A, File published: Jul 10, 2012
  The Wake-On-Radio (WOR) feature of the CC430 is a recommended method for conserving power in wireless systems in which the radio periodically wakes up from SLEEP mode and listens for incoming packets. This application note describes the theory, RF1A registers, and timing of the WOR feature. It also describes the special use case of the CC430F61xx and CC430F51xx devices. This application note concl
• Download
  AN088 -- SimpliciTI on the CC430 – Practical Modifications
  PDF, 89 Kb, File published: Mar 10, 2010
• Download
  CC430 RF Examples (Rev. C)
  PDF, 117 Kb, Revision: C, File published: Sep 7, 2012
  This application report describes the library components and implementation of the RF code examples for the CC430F61xx and CC430F51xx sub-1GHz system-on-chip (SoC) devices. The examples include support for packet-handling modes, including variable and fixed length filtering, as well as the asynchronous and synchronous modes of communication. The document also explains the key RF configuration regi
• Download
  CC430-Based Wireless Mesh Network Mains Switch
  PDF, 966 Kb, File published: May 20, 2011
  This application report describes a simple wireless mesh network running on a number of wireless power points. Each power point contains a timer switch and a power monitor. The mesh network is self learning. A data concentrator works through the various power points it discovers and forms a network. It can then program the on/off timing of the power point's switch and monitor its power consumption
• Download
  Using a DC-DC Converter to Reduce Power (Current) Consumption In CC430 Systems
  PDF, 4.6 Mb, File published: Jul 5, 2011
  This application report describes a method to reduce power consumption in CC430-based systems by using a step-down converter TPS62730.
• Download
  AN105 -- Using 1W RF3858 Front End with CC1101 Under FCC 15.247 (Rev. A)
  PDF, 983 Kb, Revision: A, File published: Aug 3, 2011
• Download
  DN036 -- CC1101+CC1190 600 kbps Data Rate, +19 dBm Transmit (Rev. A)
  PDF, 139 Kb, Revision: A, File published: Nov 7, 2011
• Download
  AN094 -- Using the CC1190 Front End with CC1101 under EN 300 220
  PDF, 371 Kb, File published: Jan 11, 2011
• Download
  AN072 -- Using the TAI-SAW TA0801A SAW Filter and External PA (Rev. A)
  PDF, 359 Kb, Revision: A, File published: Aug 19, 2009
• Download
  AN050 -- Using the CC1101 in the European 868MHz SRD band (Rev. B)
  PDF, 223 Kb, Revision: B, File published: Sep 11, 2009
• Download
  DN508 -- Frequency Scanning using CC430Fx, CC110x, and CC111xFx
  PDF, 65 Kb, File published: Jan 25, 2010
  The purpose of this design note is to show the necessary steps to successfully scan through a frequency band covering n numbers of channels, and find the strongest signal in the band.
• Download
  DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E)
  PDF, 532 Kb, Revision: E, File published: Mar 8, 2012
• Download
  DN005 -- CC11xx Sensitivity versus Frequency Offset and Crystal Accuracy (Rev. C)
  PDF, 96 Kb, Revision: C, File published: Aug 20, 2009
• Download
  DN032 -- Options for Cost Optimized CC11xx Matching
  PDF, 112 Kb, File published: Aug 25, 2010
• Download
  DN016 -- Compact Antenna Solution for 868/915 MHz (Rev. B)
  PDF, 832 Kb, Revision: B, File published: Aug 20, 2009
• Download
  DN019 -- Powering Low-Power RF Products (Rev. B)
  PDF, 327 Kb, Revision: B, File published: Sep 18, 2009
• Download
  DN507 -- FEC Decoding
  PDF, 264 Kb, File published: Jan 28, 2010
  The purpose of this design note is to show how the FEC decoding implemented in HW on the CC1100, CC1100E, CC1101, CC1110Fx, CC1111Fx, CC1150, CC2500, CC2510Fx, CC2511Fx, and CC2550 can be implemented in SW. This is in particular very important for the CC430Fx device, which has the same radio as the CC1101 and CC1110/11Fx but without HW FEC included.
• Download
  DN502 -- CRC Implementation (Rev. D)
  PDF, 55 Kb, Revision: D, File published: Oct 27, 2009
• Download
  AN001 -- SRD regulations for license free transceiver operation
  PDF, 260 Kb, File published: Feb 1, 2006
• Download
  DN033 - Mitsubishi Ceramic Antenna for 868 MHz, 915 MHz & 955 (Rev. A)
  PDF, 685 Kb, Revision: A, File published: Sep 14, 2010
• Download
  DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C)
  PDF, 369 Kb, Revision: C, File published: Aug 30, 2011
• Download
  DN002 -- Practical Sensitivity Testing
  PDF, 364 Kb, File published: Dec 20, 2006
• Download
  AN003 -- SRD Antennas
  PDF, 358 Kb, File published: Feb 1, 2006
• Download
  DN000 - Design Note Overview (Rev. T)
  PDF, 126 Kb, Revision: T, File published: Oct 12, 2011
• Download
  DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary
  PDF, 2.3 Mb, File published: Aug 26, 2010
  DN031 -- Design Notes
• Download
  AN058 -- Antenna Selection Guide (Rev. B)
  PDF, 1.8 Mb, Revision: B, File published: Oct 6, 2010
• Download
  Using the USCI I2C Master (Rev. A)
  PDF, 69 Kb, Revision: A, File published: Mar 11, 2015
  This document describes how to use the I2C master function set for MSP430в„ў devices with the USCI module. These functions can be used by MSP430 master devices to ensure proper initialization of the USCI module and provide I2C transmit and receive functionality. A similar version with DMA support has also been included. The USCI I2C master function set only supports single-master transmitter or rece
• Download
  DN035 -- Antenna Quick Guide (Rev. A)
  PDF, 138 Kb, Revision: A, File published: Feb 12, 2013
• Download
  ESD Diode Current Specification
  PDF, 520 Kb, File published: Dec 7, 2015
  This document explains the maximum ESD diode current specified for GPIO on MSP microcontrollers. Sometimes signals on specific pins exceed the supply of the MSP MCU. In such a case, the device can handle this overvoltage condition through the ESD diodes, but the ESD diode specification must be considered during application design. The items to be considered are described in this document.
• Download
  MSP Code Protection Features
  PDF, 752 Kb, File published: Dec 7, 2015
  MSP microcontrollers (MCUs) offer a number of features to help control code accessibility in the device, to add different layers of code access management and protection strategies. These include features that can lock or password protect the JTAG/SBW access, IP Encapsulation (IPE) to isolate sensitive code with different permissions than the rest of the program, and bootloader (BSL) access featur
• Download
  Design Considerations When Using the MSP430 Graphics Library
  PDF, 475 Kb, File published: Oct 5, 2012
  LCDs are a growing commodity in todays market with products as diverse as children's toys to medical devices. Modern LCDs, along with the graphics displayed on them, are growing in complexity. A graphics library can simplify and accelerate development while creating the desired user experience. TI provides the MSP430 Graphics Library for use in developing products with the MSP430в„ў MCU. This

Model Line

Manufacturer's Classification

• Semiconductors > Microcontrollers (MCU) > Other Microcontrollers > CC430