Datasheet Texas Instruments LMZ21701SILR
| Manufacturer | Texas Instruments |
| Series | LMZ21701 |
| Part Number | LMZ21701SILR |
SIMPLE SWITCHER® 3V to 17V, 1A High Density Nano Module 8-uSiP -40 to 125
Datasheets
LMZ21701 1A SIMPLE SWITCHERВ® Nano Module with 17V Maximum Input Voltage datasheet
PDF, 2.0 Mb, Revision: D, File published: Nov 5, 2014
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 8 | 8 | 8 | 8 | 8 |
| Package Type | SIL | SIL | SIL | SIL | SIL |
| Package QTY | 3000 | 3000 | 3000 | 3000 | 3000 |
| Carrier | LARGE T&R | LARGE T&R | LARGE T&R | LARGE T&R | LARGE T&R |
| Device Marking | 1701 | 7485 | EA | TXN7203EC | 1701 7485 EA |
Parametrics
| Iout(Max) | 1 A |
| Iq(Typ) | 0.017 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Type | MicroSiP (LGA) |
| Regulated Outputs | 1 |
| Soft Start | Adjustable |
| Special Features | EMI Tested,Enable,Light Load Efficiency,Power Good |
| Switching Frequency(Max) | 2500 kHz |
| Switching Frequency(Min) | 1250 kHz |
| Switching Frequency(Typ) | 2000 kHz |
| Vin(Max) | 17 V |
| Vin(Min) | 3 V |
| Vout(Max) | 6 V |
| Vout(Min) | 0.9 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LMZ21701EVM
LMZ21701 1A SIMPLE SWITCHERВ® Nano Module Evaluation Board
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- AN-2169 LMZ10501 and LMZ10500 SIMPLE SWITCHER Nano Module (Rev. A)PDF, 298 Kb, Revision: A, File published: Apr 23, 2013
The LMZ10501 and LMZ10500 SIMPLE SWITCHER nano modules are easy-to-use DC-DC solutionsoptimized for space-constrained applications. The LMZ10501 is capable of driving up to 1A load withexcellent power conversion efficiency, line and load regulation. The LMZ10500 is a 650mA version moduleand is pin-to-pin compatible with the LMZ10501. - Understanding and Applying Current-Mode Control TheoryPDF, 409 Kb, File published: Aug 19, 2007
- AN-643 EMI/RFI Board Design (Rev. B)PDF, 742 Kb, Revision: B, File published: May 3, 2004
Application Note 643 EMI/RFI Board Design - AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)PDF, 2.7 Mb, Revision: A, File published: Apr 23, 2013
This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
Model Line
Series: LMZ21701 (2)
- LMZ21701SILR LMZ21701SILT
Manufacturer's Classification
- Semiconductors > Power Management > Power Modules > Non-Isolated Module > Step-Down (Buck) Module
