Datasheet Texas Instruments LMZ20502SILR

ManufacturerTexas Instruments
SeriesLMZ20502
Part NumberLMZ20502SILR
Datasheet Texas Instruments LMZ20502SILR

SIMPLE SWITCHER® 2.7V to 5.5V, 2A High Density Nano Module 8-uSiP -40 to 125

Datasheets

LMZ20502 2 A SIMPLE SWITCHERВ® Nano Module datasheet
PDF, 2.0 Mb, Revision: C, File published: Apr 24, 2015
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin88888
Package TypeSILSILSILSILSIL
Package QTY30003000300030003000
CarrierLARGE T&RLARGE T&RLARGE T&RLARGE T&RLARGE T&R
Device Marking75430502 7543 ECTXN5201EC0502EC

Parametrics

Iout(Max)2 A
Iq(Typ)0.072 mA
Operating Temperature Range-40 to 125 C
Package TypeMicroSiP (LGA)
Regulated Outputs1
Soft StartFixed
Special FeaturesEMI Tested,Enable,Light Load Efficiency,Power Good
Switching Frequency(Max)3200 kHz
Switching Frequency(Min)2500 kHz
Switching Frequency(Typ)3000 kHz
Vin(Max)5.5 V
Vin(Min)2.7 V
Vout(Max)3.6 V
Vout(Min)0.8 V

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: LMZ20502EVM
    LMZ20502 2A SIMPLE SWITCHERВ® Nano Module Evaluation Board
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • AN-2169 LMZ10501 and LMZ10500 SIMPLE SWITCHER Nano Module (Rev. A)
    PDF, 298 Kb, Revision: A, File published: Apr 23, 2013
    The LMZ10501 and LMZ10500 SIMPLE SWITCHER nano modules are easy-to-use DC-DC solutionsoptimized for space-constrained applications. The LMZ10501 is capable of driving up to 1A load withexcellent power conversion efficiency, line and load regulation. The LMZ10500 is a 650mA version moduleand is pin-to-pin compatible with the LMZ10501.
  • Understanding and Applying Current-Mode Control Theory
    PDF, 409 Kb, File published: Aug 19, 2007
  • AN-643 EMI/RFI Board Design (Rev. B)
    PDF, 742 Kb, Revision: B, File published: May 3, 2004
    Application Note 643 EMI/RFI Board Design
  • AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)
    PDF, 2.7 Mb, Revision: A, File published: Apr 23, 2013
    This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.

Model Line

Series: LMZ20502 (2)

Manufacturer's Classification

  • Semiconductors > Power Management > Power Modules > Non-Isolated Module > Step-Down (Buck) Module