Datasheet Texas Instruments OPA2277UA/2K5E4
| Manufacturer | Texas Instruments |
| Series | OPA2277 |
| Part Number | OPA2277UA/2K5E4 |
10µV, 0.1µV/˚C, High-Precision, Low-Power Operational Amplifier 8-SOIC -40 to 85
Datasheets
OPAx277 High Precision Operational Amplifiers datasheet
PDF, 1.7 Mb, Revision: B, File published: Jun 30, 2015
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 8 | 8 | 8 |
| Package Type | D | D | D |
| Industry STD Term | SOIC | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 2500 | 2500 | 2500 |
| Carrier | LARGE T&R | LARGE T&R | LARGE T&R |
| Device Marking | OPA | 2277U | A |
| Width (mm) | 3.91 | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 | 1.75 |
| Mechanical Data | Download | Download | Download |
Parametrics
| Approx. price | 1.65 | 1ku US$ |
| Architecture | Bipolar |
| CMRR(Min) | 130 dB |
| CMRR(Typ) | 140 dB |
| Features | Small Size |
| GBW(Typ) | 1 MHz |
| Input bias current(Max) | 1000 pA |
| Input bias current(Typ) | 500 pA |
| Input common mode headroom (to negative supply)(Typ) | 2 V |
| Input common mode headroom (to positive supply)(Typ) | -2 V |
| Iq per channel(Max) | 0.825 mA |
| Iq per channel(Typ) | 0.79 mA |
| Number of channels | 2 |
| Offset drift(Typ) | 0.1 uV/C |
| Operating temperature range | -40 to 85 C |
| Output current(Typ) | 35 mA |
| Output swing headroom (to negative supply)(Typ) | 0.5 V |
| Output swing headroom (to positive supply)(Typ) | -1.2 V |
| Package Group | PDIP|8,SOIC|8,VSON|8 |
| Package size: mm2:W x L | 8PDIP: 93 mm2: 9.43 x 9.81 (PDIP|8),8SOIC: 19 mm2: 3.91 x 4.9 (SOIC|8),8VSON: 16 mm2: 4 x 4 (VSON|8) PKG |
| Rail-to-rail | No |
| Rating | Catalog |
| Slew rate(Typ) | 0.8 V/us |
| Total supply voltage(Max) | 36 +5V=5, +/-5V=10 |
| Total supply voltage(Min) | 4 +5V=5, +/-5V=10 |
| Vn at 1 kHz(Typ) | 8 nV/rtHz |
| Vos (offset voltage @ 25 C)(Max) | 0.025 mV |
Eco Plan
| RoHS | Compliant |
| Pb Free | Yes |
Application Notes
- High-Voltage Signal Conditioning for Low Voltage ADCsPDF, 135 Kb, File published: Jun 15, 2004
Analog designers are frequently required to develop circuits that convert high-voltage signals to levels acceptable for low-voltage data converters. This paper describes several solutions for this common task using modern amplifiers and typical power supplies. Five examples of conditioning ±10V bipolar signals for low-voltage single-rail analog-to-digital converters(ADCs) are presented: - Precision Absolute Value CircuitsPDF, 100 Kb, File published: Oct 2, 2000
You can build a precision absolute value circuit using two op amps and two precision resistors. If you use an op amp and an IC difference amplifier no user supplied precision resistors or resistor adjustments are required. Circuits shown are suitable for precision split supply operation and for single-supply operation. When used with a rail-to-rail op amp the single supply circuit can approach a - OPA277 OPA2277 OPA4277 EMI Immunity Performance (Rev. A)PDF, 88 Kb, Revision: A, File published: Oct 31, 2012
Model Line
Series: OPA2277 (15)
Manufacturer's Classification
- Semiconductors > Analog and Mixed-Signal > Amplifiers > Operational amplifiers (op amps) > Precision op amps (Vos<1mV)
