Datasheet Texas Instruments TLC5510INSG4

TLC5510, TLC5510A 8-BIT HIGH-SPEED ANALOG-TO-DIGITAL CONVERTERS
SLAS095L ­ SEPTEMBER 1994 ­ REVISED JUNE 2003 features D D D D D Analog Input Range ­ TLC5510 . 2 V Full Scale ­ TLC5510A . 4 V Full Scale 8-Bit Resolution Integral Linearity Error ± 0.75 LSB Max (25°C) ± 1 LSB Max (­ 20°C to 75°C) Differential Linearity Error ± 0.5 LSB Max (25°C) ± 0.75 LSB Max (­ 20°C to 75°C) Maximum Conversion Rate 20 Mega-Samples per Second (MSPS) Max D D D D D D D D 5-V Single-Supply Operation Low Power Consumption TLC5510 . 127.5 mW Typ TLC5510A . 150 mW Typ (includes reference resistor dissipation) TLC5510 is Interchangeable With Sony CXD1175 applications
Digital TV Medical Imaging Video Conferencing High-Speed Data Conversion QAM Demodulators
PW OR NS PACKAGE (TOP VIEW) description
The TLC5510 and TLC5510A are CMOS, 8-bit, 20 MSPS analog-to-digital converters (ADCs) that utilize a semiflash architecture. The TLC5510 and TLC5510A operate with a single 5-V supply and typically consume only 130 mW of power. Included is an internal sample-and-hold circuit, parallel outputs with high-impedance mode, and internal reference resistors. The semiflash architecture reduces power consumption and die size compared to flash converters. By implementing the conversion in a 2-step process, the number of comparators is significantly reduced. The latency of the data output valid is 2.5 clocks. OE DGND D1(LSB) D2 D3 D4 D5 D6 D7 D8(MSB) VDDD CLK 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 DGND REFB REFBS AGND AGND ANALOG IN VDDA REFT REFTS VDDA VDDA VDDD The TLC5510 uses the three internal reference resistors to create a standard, 2-V, full-scale conversion range using VDDA. Only external jumpers are required to implement this option and eliminates the need for external reference resistors. The TLC5510A uses only the center internal resistor section with an externally applied 4-V reference such that a 4-V input signal can be used. Differential linearity is 0.5 LSB at 25°C and a maximum of 0.75 LSB over the full operating temperature range. Typical dynamic specifications include a differential gain of 1% and differential phase of 0.7 degrees. The TLC5510 and TLC5510A are characterized for operation from ­20°C to 75°C.
AVAILABLE OPTIONS PACKAGE TA TSSOP (PW) TLC5510IPW ­ SOP (NS) (TAPE AND REEL ONLY) TLC5510INSLE TLC5510AINSLE MAXIMUM FULL-SCALE FULL SCALE INPUT VOLTAGE 2V 4V Available in tape and reel only and ordered as the shown in the Available Options table below. ­ 20°C to 75°C Please be aware that an important notice concerning availability, standard warranty, an …