Datasheet Texas Instruments TPS54973PWPR

ManufacturerTexas Instruments
SeriesTPS54973
Part NumberTPS54973PWPR
Datasheet Texas Instruments TPS54973PWPR

3.3V Input, 9A Synchronous Step-Down Converter for Prebiased Outputs 28-HTSSOP -40 to 85

Datasheets

3-V to 4-V Input 9-A Output Synchronous Buck Switcher datasheet
PDF, 700 Kb, Revision: A, File published: Mar 8, 2005
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin28
Package TypePWP
Industry STD TermHTSSOP
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingTPS54973
Width (mm)4.4
Length (mm)9.7
Thickness (mm)1
Pitch (mm).65
Max Height (mm)1.2
Mechanical DataDownload

Parametrics

Control ModeVoltage Mode
Duty Cycle(Max)90 %
Iout(Max)9 A
Iq(Typ)11 mA
Operating Temperature Range-40 to 85 C
Package GroupHTSSOP
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Frequency Synchronization,Power Good,Pre-Bias Start-Up,Synchronous Rectification
Switching Frequency(Max)700 kHz
Switching Frequency(Min)280 kHz
TypeConverter
Vin(Max)4 V
Vin(Min)3 V
Vout(Max)2.5 V
Vout(Min)0.9 V

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: TPS54973EVM-017
    9-A DC/DC Converter with Disabled Sinking During Startup
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: XILINXPWR-082
    XILINXPWR-082 Power Management Evaluation Module for Xilinx FPGAs
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Sequencing with TPS54x80 and TPS54x73 DC/DC Converters
    PDF, 169 Kb, File published: Apr 14, 2003
    Design of a power supply for a high-performance point-of-load processor requires special attention to manage core and input/output (I/O) voltage sequencing, which is critical to device operation and long term reliability. The TPS54x80 devices of low input voltage synchronous-buck dc/dc converters are designed for easily implementing sequential, ratio-metric, or simultaneous sequencing schemes. F
  • Thermal Performance of SWIFT(TM) DC/DC Converters in the 28-Pin HTSSOP Package
    PDF, 267 Kb, File published: Feb 4, 2005
    The thermal management of printed-circuit boards is complex, but must be well understood to achieve optimum performance and reliability. SWIFT(TM) dc/dc converters in the 28-pin HTSSOP package rely on an exposed lead frame die pad [PowerPAD(TM)] on the bottom of the package to provide an extremely low thermal resistance from junction to case. The thermal performance of the 6-, 9-, and 14-A SWIFT d
  • Using Low Voltage SWIFT DC/DC Converters with Ceramic Capacitors
    PDF, 490 Kb, File published: Jan 8, 2003
    This application note investigates an adequate phase margin for stable operation of SWIFTв„ў regulators with the ceramic capacitors at worst-case tolerances of regulator and external parts. TI also shows how the bandwidth and gain of feedback loop impact on load-current transient-response characteristics. Measurements and analysis have shown that the voltage-mode control SWIFTв„ў regulat

Model Line

Series: TPS54973 (3)

Manufacturer's Classification

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)