Datasheet Texas Instruments LP2951DRG4
| Manufacturer | Texas Instruments |
| Series | LP2951 |
| Part Number | LP2951DRG4 |
30V, 100mA Micropower Voltage Regulators with Shutdown 8-SOIC -40 to 125
Datasheets
LP295x Adjustable Micropower Voltage Regulators with Shutdown datasheet
PDF, 3.7 Mb, Revision: I, File published: Nov 12, 2014
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Device Marking | LP2951 |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Download |
Parametrics
| Accuracy | 3 % |
| Fixed Output Options | 3,3.3,5 V |
| Iout(Max) | 0.1 A |
| Iq(Typ) | 0.075 mA |
| Noise | 160 uVrms |
| Operating Temperature Range | -40 to 125 C |
| Output Capacitor Type | Non-Ceramic |
| Output Options | Adjustable Output,Fixed Output |
| PSRR @ 100KHz | 57 dB |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Enable,Power Good |
| Thermal Resistance ОёJA | 52 В°C/W |
| Vdo(Typ) | 380 mV |
| Vin(Max) | 30 V |
| Vin(Min) | 2 V |
| Vout(Max) | 29 V |
| Vout(Min) | 1.2 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LP2951EVM
LP2951 Fixed/Adjustable Micropower Low-Dropout (LDO) Regulator Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Low-Voltage Current Loop TransmitterPDF, 519 Kb, File published: Aug 2, 2007
- Extending the Input Voltage Range of an LDO RegulatorPDF, 32 Kb, File published: Aug 16, 2002
This application report explains how to use a FET to overcome the input voltage limitation of a linear regulator. - ESR Stability and the LDO RegulatorPDF, 83 Kb, File published: May 7, 2002
Choosing an output capacitor for LDO regulators with PNP or PMOS pass element can be difficult to specific ESR requirements. This application note explains why higher ESR capacitors are necessary how to chose them and how to determine whether or not the regulator is stable. - Simple Power Solution Using LDOs for the DM365 (Rev. A)PDF, 104 Kb, Revision: A, File published: Sep 11, 2009
- 3.6V - 5.5V Input LDO with Dual-Level Output Reference Design for MSP430 (Rev. A)PDF, 199 Kb, Revision: A, File published: Jun 14, 2010
This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 3.6 V to 5.5 V and who are also interested in using an easy-to-use low-dropout linear regulator (LDO) for a simple design with extended battery life by putting the MSP430 into a low-power state between operating states. - Battery ChargingPDF, 146 Kb, File published: Mar 21, 2007
- Low Power 150-mA LDO Linear Regulators. Extended Output Voltage Adjustment RangePDF, 41 Kb, File published: Jun 11, 1999
The TPS76301 low-dropout (LDO) adjustable linear regulator generates a regulated 1-V output from an input voltage ranging from 3 V to 6 V. The application circuit is based on the application detailed in the TPS76301 data sheet (TI Literature number SLVS181A Figure 21) except for the auxiliary circuit which is shown here in Figure 1. - 3.6V - 5.5V Input LDO Reference Design for MSP430 (Rev. A)PDF, 110 Kb, Revision: A, File published: Jun 14, 2010
This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 3.6 V to 5.5 V and who are also interested in using an easy-to-use low-dropout linear regulator (LDO) for a simple design but may not be as concerned about maintaining the highest possible efficiency or longest battery life. - AN-1815 LDOs Ease the Stress of Start-Up (Rev. A)PDF, 81 Kb, Revision: A, File published: Apr 24, 2013
The LP38851/52/53 devices with soft-start provide a reliable way to ensure that start-up into highcapacitive loads is uneventful and stress free. - Ceramic Capacitors Replace Tantalum Capacitors in LDOs (Rev. A)PDF, 44 Kb, Revision: A, File published: Oct 13, 2006
With the proper considerations ceramic output capacitors can be used with low dropout regulators (LDO) and DC/DC switching converters that require tantulum output capacitors. - Understanding LDO DropoutPDF, 52 Kb, File published: May 9, 2005
Not all low dropout (LDO) linear regulator data sheets provide the voltage dropout information needed for all applications. This application report shows a designer how to use an LDO data sheet's specified dropout performance to determine the dropout voltage at other operating conditions. - AN-1061 Power Conversion in Line-Powered Equipment (Rev. B)PDF, 406 Kb, Revision: B, File published: Apr 23, 2013
This application note describes line-powered equipment and power conversion techniques or methods tosolve those typical power needs. - A Topical Index of TI Supply Voltage Supervisor (SVS) Application NotesPDF, 56 Kb, File published: Jun 15, 2015
- Techniques for accurate PSRR measurementsPDF, 1.9 Mb, File published: Oct 28, 2013
- AN-1950 Silently Powering Low Noise Applications (Rev. A)PDF, 10.5 Mb, Revision: A, File published: Apr 22, 2013
This application report explains how to implement a low noise switch mode power supply solution. Itintroduces the sources of noise and explain how to minimize them. A big factor in noise generation andpropagation is the printed circuit board layout. Important basics are discussed. Circuit measurementtechniques are also explained to guide a design engineer towards a low noise but efficient so - LDO Performance Near DropoutPDF, 149 Kb, File published: Oct 8, 2010
- AN-1482 LDO Regulator Stability Using Ceramic Output Capacitors (Rev. A)PDF, 169 Kb, Revision: A, File published: Apr 25, 2013
Ultra-low ESR capacitors such as ceramics are highly desirable because they can support fast-changingload transients and also bypass very high frequency noise coming from switching converter powersources which a linear regulator can not reject. However using ultra-low ESR capacitors on the output ofan LDO regulator requires that specific design changes be implemented to ensure loop stabili - Technical Review of Low Dropout Voltage Regulator Operation And PerformancePDF, 284 Kb, File published: Aug 30, 1999
This application report provides a technical review of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current and topologies. The report also includes detailed discussions of load/line regulation efficiency frequency response range of stable ESR and accuracy of LDO voltage regulators. - Linear and Switching Voltage Regulator Fundamental Part 1PDF, 183 Kb, File published: Mar 21, 2007
- AN-1028 Maximum Power Enhancement Techniques for Power Packages (Rev. B)PDF, 684 Kb, Revision: B, File published: May 6, 2013
The purpose of this application report is to aid the user in maximizing the power handling capability of Texas Instruments power packages by using the SOT-223 as an example. - Fundamental Theory of PMOS LDO Voltage RegulatorsPDF, 66 Kb, File published: May 7, 1999
This report presents a fundamental understanding on the theory of low-dropout voltage regulators using a PMOS FET as the pass element to adjust the output current to the load requirements. - Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)PDF, 509 Kb, Revision: A, File published: Jun 4, 2008
- Understanding the Terms and Definitions of LDO Voltage RegulatorsPDF, 197 Kb, File published: Oct 21, 1999
This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab - Packaging Limits Range of Linear RegulatorsPDF, 75 Kb, File published: May 8, 2010
The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator. - A Topical Index of TI LDO Application Notes (Rev. F)PDF, 82 Kb, Revision: F, File published: Jun 27, 2019
- LDO PSRR Measurement Simplified (Rev. A)PDF, 131 Kb, Revision: A, File published: Aug 9, 2017
This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods - LDO Noise Demystified (Rev. A)PDF, 785 Kb, Revision: A, File published: Aug 9, 2017
Thisapplicationreportexplainsthe differencebetweennoiseand PSRRof an LDO.It also explainsthedifferentwaysnoiseis specifiedin LDOdatasheetsandwhichspecificationshouldbe usedin theapplication.Finallyit explainshow LDOnoiseis reduced.
Model Line
Series: LP2951 (15)
Manufacturer's Classification
- Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO
