Datasheet Texas Instruments LM338T

ManufacturerTexas Instruments
SeriesLM338
Part NumberLM338T
Datasheet Texas Instruments LM338T

5A Adjustable Output Linear Regulator 3-TO-220 0 to 125

Datasheets

LM138 and LM338 5-Amp Adjustable Regulators datasheet
PDF, 3.4 Mb, Revision: C, File published: Dec 19, 2016
Extract from the document

Prices

Status

Lifecycle StatusNRND (Not recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin3
Package TypeNDE
Industry STD TermTO-220
JEDEC CodeR-MSFM-P
Package QTY45
CarrierTUBE
Device MarkingLM338T P+
Width (mm)10.16
Length (mm)14.986
Thickness (mm)4.572
Pitch (mm)2.54
Max Height (mm)4.7
Mechanical DataDownload

Replacements

ReplacementLM338T/NOPB
Replacement CodeS

Parametrics

Accuracy2.4 %
Iout(Max)5 A
Iq(Typ)0.045 mA
Noise37 uVrms
Operating Temperature Range0 to 125 C
Output Capacitor TypeNon-Ceramic
Output OptionsAdjustable Output
PSRR @ 100KHz10 dB
Package GroupTO-220
Package Size: mm2:W x LSee datasheet (TO-220) PKG
RatingCatalog
Regulated Outputs1
Special FeaturesN/A
Thermal Resistance ОёJA23 В°C/W
Vdo(Typ)2700 mV
Vin(Max)40 V
Vin(Min)4.2 V
Vout(Max)32 V
Vout(Min)1.24 V

Eco Plan

RoHSSee ti.com

Application Notes

  • Add Kelvin Sensing and Parallel Capability to 3-Terminal Regulators
    PDF, 93 Kb, File published: Oct 3, 2002
  • Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A)
    PDF, 284 Kb, Revision: A, File published: May 5, 2013
    When working with voltage regulator circuits the designer is often confronted with the need to calculatethe tolerance of the regulated output voltage. For fixed voltage regulators this problem is easily managedbecause the required information is directly supplied on the semiconductor manufacturer's data sheet.
  • AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)
    PDF, 814 Kb, Revision: A, File published: May 6, 2013
    The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t
  • AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B)
    PDF, 300 Kb, Revision: B, File published: May 6, 2013
    This application note discusses the operation and compensation of linear regulators.
  • Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)
    PDF, 509 Kb, Revision: A, File published: Jun 4, 2008
  • Understanding the Terms and Definitions of LDO Voltage Regulators
    PDF, 197 Kb, File published: Oct 21, 1999
    This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab
  • Packaging Limits Range of Linear Regulators
    PDF, 75 Kb, File published: May 8, 2010
    The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.
  • A Topical Index of TI LDO Application Notes (Rev. F)
    PDF, 82 Kb, Revision: F, File published: Jun 27, 2019

Model Line

Series: LM338 (3)

Manufacturer's Classification

  • Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO