Datasheet Texas Instruments TPS60110PWPRG4
| Manufacturer | Texas Instruments |
| Series | TPS60110 |
| Part Number | TPS60110PWPRG4 |
Regulated 5-V High-Power Low-Noise Charge Pump DC/DC Converter 20-HTSSOP -40 to 85
Datasheets
Regulated 5-V 300-mA Low-Noise Charge Pump DC/DC Converter datasheet
PDF, 993 Kb, Revision: C, File published: Aug 7, 2008
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 20 |
| Package Type | PWP |
| Industry STD Term | HTSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | TPS60110 |
| Width (mm) | 4.4 |
| Length (mm) | 6.5 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Download |
Parametrics
| Iout(Max) | 0.3 A |
| Iq(Typ) | 0.05 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | HTSSOP |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Enable,Frequency Synchronization |
| Switching Frequency(Max) | 400 kHz |
| Switching Frequency(Min) | 200 kHz |
| Type | Charge Pump |
| Vin(Max) | 5.4 V |
| Vin(Min) | 2.7 V |
| Vout(Max) | 5 V |
| Vout(Min) | 5 V |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TPS60110EVM-132
3 battery cells/1 Li-Ion cell to 5.0V, 300mA zero ripple charge pump EVM
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Additional Negative Output with TPS601xxPDF, 64 Kb, File published: Mar 26, 2001
In addition to a main positive supply voltage, some applications also require a negative voltage at low current. The power-supply circuit should easily be able to provide the application with this additional supply voltage. This note discusses a simple way to derive a negative voltage from a charge pump dc/dc converter. An easy solution to stabilize the negative voltage is to use a shunt regulator - TPS6010x/TPS6011x Charge Pump (Rev. A)PDF, 391 Kb, Revision: A, File published: Dec 16, 1999
Charge pumps are dc/dc converters that use a capacitor instead of an inductor or transformer for energy storage. They are able to generate positive or negative voltages from the input voltage. The input voltage can be multiplied by some factor such as 0.5, 2, 3, and so on, to generate the output voltage desired. Often, charge pumps and all related parts (including those used for energy storage) ar - PowerPAD Thermally Enhanced Package (Rev. H)PDF, 983 Kb, Revision: H, File published: Jul 6, 2018
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, Revision: B, File published: Jun 15, 2017
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
Model Line
Series: TPS60110 (4)
- TPS60110PWP TPS60110PWPG4 TPS60110PWPR TPS60110PWPRG4
Manufacturer's Classification
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Charge Pump (Inductorless)
