Datasheet Texas Instruments 5962-9958301QPA

Manufacturer	Texas Instruments
Series	TL5001M
Part Number	5962-9958301QPA

PWM Controller with Wide Input Range 8-CDIP -55 to 125

Datasheets

Download

PDF, 1.1 Mb, Revision: F, File published: Jan 31, 2002

Extract from the document

Prices

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Packaging

Pin	8	8
Package Type	JG	JG
Industry STD Term	CDIP	CDIP
JEDEC Code	R-GDIP-T	R-GDIP-T
Package QTY	1	1
Carrier	TUBE	TUBE
Device Marking	TL5001M	9958301QPA
Width (mm)	6.67	6.67
Length (mm)	9.6	9.6
Thickness (mm)	4.57	4.57
Pitch (mm)	2.54	2.54
Max Height (mm)	5.08	5.08
Mechanical Data	Download	Download

Parametrics

Duty Cycle(Max)	100 %
Iout(Max)	3 A
Iq(Typ)	1.1 mA
Operating Temperature Range	-55 to 125 C
Package Group	CDIP
Rating	Military
Regulated Outputs	1
Switching Frequency(Max)	400 kHz
Switching Frequency(Min)	50 kHz
Type	Controller
Vin(Max)	40 V
Vin(Min)	3.6 V
Vout(Max)	50 V
Vout(Min)	1 V

Eco Plan

RoHS	See ti.com

Application Notes

Download
Examples Of Applications With The Pulse Width Modulator TL5001
PDF, 462 Kb, File published: Jan 1, 1997
Switched-mode techniques are used more and more nowadays for the design of power supplies. Switch mode power supplies have considerably higher efficiency when compared to designs employing linear regulators, and can be used for higher output powers. The rectified input voltage in a switching regulator is chopped by means of a switch. The LC network after the switch smoothes this voltage, resulting
Download
Understanding Buck Power Stages In Switchmode Power Supplies
PDF, 173 Kb, File published: Mar 4, 1999
A switching power supply consists of the power stage and the control circuit. The power stage performs the basic power conversion from the input voltage to the output voltage and includes switches and the output filter. This report addresses the buck power stage only and does not cover control circuits. Detailed steady-state and small-signal analysis of the buck power stage operating in continuous
Download
Off-Line SMPS Failure Modes PWM Switchers and DC-DC Converters
PDF, 71 Kb, File published: Mar 22, 2000
Today's voltage regulator modules (VRMs) employ off-line SMPS techniques. Traditionally, they are usually discarded when they fail because they are so challenging to debug and so inexpensive to replace. Investigation of these failed modules reveals some common failure modes. Some failures are caused by other systems' passive components that fail after repeated electrical stress. Recognizing these
Download
Understanding Buck-Boost Power Stages in Switchmode Power Supplies (Rev. A)
PDF, 363 Kb, Revision: A, File published: May 28, 2002
Download
Understanding Boost Power Stages In Switchmode Power Supplies
PDF, 149 Kb, File published: Mar 4, 1999
A switching power supply consists of the power stage and the control circuit. The power stage performs the basic power conversion from the input voltage to the output voltage and includes switches and the output filter. This report addresses the boost power stage only and does not cover control circuits. The report includes detailed steady-stage and small-signal analysis of the boost power stage o
Download
Designing with the TL5001 PWM Controller (Rev. A)
PDF, 265 Kb, Revision: A, File published: Sep 1, 1995
Electrical and electronic products required to be lighter, smaller, use less power, and cost less. Manufacturers are turning to small high-frequency dc-to-dc converters for the power supply solution. The TL5001, pulse-width modulator (PWM) control integrated circuit, when combined with a few external components, can implement the converters and operate at frequencies to 400 kHz. This document p

Model Line

Series: TL5001M (3)

5962-9958301QPA TL5001MJG TL5001MJGB

Manufacturer's Classification

Semiconductors > Space & High Reliability > Power Management Products > Non-isolated DC/DC Switching Regulators

Other Names:

59629958301QPA, 5962 9958301QPA