Datasheet Texas Instruments TS5A3159ADBVRG4
| Manufacturer | Texas Instruments |
| Series | TS5A3159A |
| Part Number | TS5A3159ADBVRG4 |
1 Ohm SPDT Analog Switch 5-V/3.3-V Single Channel 2:1 Multiplexer/Demultiplexer 6-SOT-23 -40 to 85
Datasheets
TS5A3159A 1-Ω SPDT Analog Switch 5-V and 3.3-V Single-Channel 2:1 Multiplexer and Demultiplexer datasheet
PDF, 1.2 Mb, Revision: E, File published: Nov 19, 2015
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 6 | 6 | 6 |
| Package Type | DBV | DBV | DBV |
| Industry STD Term | SOT-23 | SOT-23 | SOT-23 |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 3000 | 3000 | 3000 |
| Carrier | LARGE T&R | LARGE T&R | LARGE T&R |
| Device Marking | JAJK | JAJH | JAJR |
| Width (mm) | 1.6 | 1.6 | 1.6 |
| Length (mm) | 2.9 | 2.9 | 2.9 |
| Thickness (mm) | 1.2 | 1.2 | 1.2 |
| Pitch (mm) | .95 | .95 | .95 |
| Max Height (mm) | 1.45 | 1.45 | 1.45 |
| Mechanical Data | Download | Download | Download |
Parametrics
| Additional Features | Powered off protection,Break-before-make |
| Bandwidth | 100 MHz |
| Bandwidth(Max) | 100 MHz |
| Configuration | 2:1 SPDT |
| ESD Charged Device Model | 1 kV |
| ESD HBM | 2 kV |
| Input/Ouput Voltage(Max) | 5.5 V |
| Input/Output Continuous Current(Max) | 200 mA |
| Input/Output OFF-state Capacitance(Typ) | 18 pF |
| Input/Output ON-state Capacitance(Typ) | 55 pF |
| Number of Channels | 1 |
| OFF-state leakage current(Max) | 0.1 µA |
| ON-state leakage current(Max) | 0.1 µA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 6SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rating | Catalog |
| Ron(Max) | 3.5 Ohms |
| Ron(Typ) | 0.7 Ohms |
| Supply Current(Max) | 0.5 uA |
| Supply Range | 5.5 Max |
| VIH(Min) | 1.5 V |
| VIL(Max) | 0.8 V |
| Vdd(Max) | 5.5 V |
| Vdd(Min) | 1.65 V |
| Vss(Max) | N/A V |
| Vss(Min) | N/A V |
Eco Plan
| RoHS | Compliant |
Application Notes
- Preventing Excess Power Consumption on Analog SwitchesPDF, 238 Kb, File published: Jul 3, 2008
Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For most analog switches, this application condition leads to an excess supply current draw that catches system designers by surprise. This applica
Model Line
Series: TS5A3159A (12)
Manufacturer's Classification
- Semiconductors > Switches and Multiplexers > Analog Switches/Muxes
