Datasheet Texas Instruments TMS320VC33PGE120G4

Datasheets

Prices

Status

Packaging

Eco Plan

Design Kits & Evaluation Modules

• Evaluation Modules & Boards: TMDSDSK33
  TMS320VC33 University DSK
  Lifecycle Status: Active (Recommended for new designs)
  

Application Notes

• Download
  UltraLow-Power Supply Voltage Supervisor Family TPS383x
  PDF, 384 Kb, File published: Jun 20, 2000
  Supply voltage supervisors have found their solid place in digital systems. They monitor the system's supply voltage and ensure a correct initialization of the circuits connected. The trend with digital integrated circuits with extremely low current consumption requires an equivalent reduction of the power dissipation of analog circuits. This report describes an advanced supply voltage supervisor
• Download
  Interfacing the DAC8534 to the TMS320VC33 DSP
  PDF, 208 Kb, File published: Sep 3, 2003
  This application report describes how to interface the DAC8534 digital-to-analog converter to the TMS320VC33 digital signal processing.
• Download
  Implementing a Noise Cancellation System with the TMS320C31
  PDF, 196 Kb, File published: Jul 1, 1997
  This paper is concerned with the digital implementation of spectral subtraction modified algorithm on a Texas Instruments (TI)(tm) TMS320C31 Digital Signal Processor (DSP). The algorithm was developed to suppress a car noise in speech picked up by one microphone in a running car for application in mobil hand-free telephony. The real-time implementation on floating-point processor is described. The
• Download
  Implementing a Fast 3-D Vision Sensor With Multiple TMS320C31 DSPs
  PDF, 476 Kb, File published: Jul 1, 1997
  The stereovision process determines the distances of objects by acquiring two images in different positions and studying the difference in locations of the corresponding stereo points. Various techniques have been developed to infer 3-D information from a set of brightness images. One technique, called passive stereovision, is appealing because of its ranging applications and especially because of
• Download
  Signal Processing Subsystem-Detection of Stimulated Otoacoustic Emissions 'C31
  PDF, 106 Kb, File published: Jul 1, 1997
  As screening programs for neonatal hearing become more common, there is a need for automatic signal processing methods to classify measured signals and results. Transient click-evoked otoacoustic emissions (TEOAE) are becoming an important tool for screening, especially of hearing in newborn children, because this objective technique requires little cooperation from the patient. The principal prob
• Download
  TMS320C31 Embedded Control Technical Brief
  PDF, 513 Kb, File published: Aug 1, 1992
  The Texas Instruments low-cost, high-performance TMS320C31 has defineda new role for digital signal processors in embedded systems. Well-suited forgeneral-purpose use, the TMS320C31 is finding widespread acceptance asan embedded controller in applications such as:
  Industrial automation
  Telecommunications
  Motor control
  Automotive
  Instrumentation
  Laser printers
  Scanners
  
• Download
  An Adaptive Noise Cancelling System to Enhance Sonar Receiver Performance -C31
  PDF, 181 Kb, File published: Jul 1, 1997
  The performance of sonar receivers on board a ship are degraded by mechanical noise. In order to improve the detection performance of the acoustic sensors (hydrophones), we have designed a local mechanical noise cancelling system using the Adaptive Noise Cancelling (ANC) approach with a single noise reference . The implementation was realized and validated on underwater acoustic signals with a PC-
• Download
  Switching From Bootloader to MP Mode with TMS320C31
  PDF, 28 Kb, File published: Jun 1, 1997
  The 'C31 bootloader is expected to be used only at reset and then the 'C31 will stay in MCBL mode the rest of the time. It is sometimes convenient that once loading is done, the MCBL/MP pin is changed to enable the microprocessor memory map. This document discusses a technique to change from bootloader mode to microprocessor mode on-the-fly.
• Download
  Implementing Vocoder and HFF Modem Algorithms Using the TMS320C31 DSP
  PDF, 100 Kb, File published: Jul 1, 1997
  This application report describes the implementation of a universal DSP module (UDM) to vocoders for a range of bit rates and to modems operating in the voice-band range. The UDM is based on the Texas Instruments (TI(TM)) TMS320C31 DSP. Difficulties in vocoder design are examined as well as measurement results for the HF modem under simulated HF channel environments. The error correction codi
• Download
  EDRAM Memory Controller for the TMS320C31 DSP Application Report
  PDF, 152 Kb, File published: Jan 1, 1998
  This report provides an overview of a controller chip set to improve processor memory management and transactions while using the Texas Instruments(TI) TMS320C31 digital signal processor(DSP). This application uses a minimum number of wait states which increases processor throughput.
• Download
  Real-Tme Implementation of a COFDM Modem for Data Transmission Over HF Channels
  PDF, 193 Kb, File published: Jul 1, 1997
  This application report describes a transmission system with Orthogonal Frequency Division Multiplexing (OFDM) and Quadrature Phase Shift Keying (QPSK) over noisy multipath fading channels. When an encoder and a coherent receiver based on the maximum-likelihood estimation is added, we obtain the modulator-demodulator (COFDM MODEM) presented in this paper. The required performance was obtained th
• Download
  An Introduction to Fractal Image Compression
  PDF, 609 Kb, File published: Jan 1, 1997
  This paper gives and introduction on Image Coding based on Fractals and develops a simple algorithm to be used as a reference design.The Fractal Coding System described in this project was developed from the ideas proposed by Arnaud Jacquin in his paper published in IEEE Trans. "Image Coding Based on Fractal Theory of Iterated Contractive Image Transformation"Two implementations of the pro
• Download
  In-Service, Non-Intrusive Measurement Device in Telecomm. Networks - TMS320C31
  PDF, 52 Kb, File published: Jul 1, 1997
  Telecommunication channels cannot be monitored in an operational mode with traditional instrumentation systems. For example, transmission anomalies are usually not detected, which affects the quality of service to the end user.This application report describes the implementation of the Texas Instruments (TI) (tm) TMS320C31 digital signal processor (DSP) as an in-service, non-intrusive measurem
• Download
  FIFO Mailbox-Bypass Registers: Using Bypass Registers to Initialize DMA Control (Rev. A)
  PDF, 65 Kb, Revision: A, File published: Mar 1, 1996
  The TI 32- and 36-bit FIFOs contain mailbox-bypass registers that transmit priority from one FIFO port to the other, port A to B or port B to A with out storing the data in the FIFO SRAM buffer. This document describes the FIFO mailbox-bypass registers and shows an example of direct memory access (DMA) control of a digital signal processor (DSP). The components described are the SN74ACT3641 and th
• Download
  Interfacing the TLV5639 DAC to the TMS320C31 DSP
  PDF, 131 Kb, File published: Feb 12, 2001
  This application report discusses the implementation of an interface between the TLV5639 DAC and the TMS320C31 DSP. The TLV5619-5639EVM is used to demonstrate the complete circuit implementation. This EVM is the evaluation module for the TLV5639 and the TLV561 DACs that take care of all necessary signal manipulation for the control signals of the DAC. The TLV5639 is a 12-bit DAC with a microproces
• Download
  Interfacing the TLV2541 ADC and the TLV5618A DAC to the TMS320C31 DSP
  PDF, 352 Kb, File published: Nov 13, 2000
  This application report is written to help design engineers or technicians implement a simple data acquisition system using serial analog-to-digital converters (ADCs) and digital-to-analog (DACs) from Texas Instruments. A hardware and software solution for interfacing the TLV2541 ADC and the TLV5618A DAC to the TMS320C31 DSP with the use of the TMS320C3x DSP starter kit (DSK) is presented here.
• Download
  Interfacing the TLV2544/TLV2548 ADC to the TMS320C31 DSP
  PDF, 579 Kb, File published: Oct 6, 2000
  This application report presents a hardware and software solution for interfacing the TLV2544/TLV2548 12-bit, 200Ksps, 4/8-channel, low-power, serial, successive approximation register (SAR) analog-to-digital converters (ADC) to the 32-bit floating point TMS320CX digital signal processor (DSP) through the use of the TMS320C31 DSP starter kit (DSK).A digital-to-analog converter (DAC) interface
• Download
  Interfacing Memory to the TMS320C32 DSP (Rev. A)
  PDF, 376 Kb, Revision: A, File published: May 1, 1996
  The low-cost of the TMS320C32 (?C32) makes 32-bit floating-point digital signal processing (DSP) available to a wider variety of applications than ever before. This document explains in detail the features of the ?C32 enhanced memory interface with design examples for 32- 16- and 8-bit-wide external memories. Comprehensive diagrams show precise operation of the processor and complete circuits fo
• Download
  FIFO Synchronous Retransmit: Programmable DSP-Interface for FIR Filtering (Rev. A)
  PDF, 76 Kb, Revision: A, File published: Mar 1, 1996
  The SN74ACT3638 FIFO contains a patented synchronous retransmit feature which allows data stored within the FIFO to be re-read starting at a selected position. This document shows the use of the retransmit feature with a digital signal processor (DSP) for finite impulse response (FIR) filtering. The application uses the 32-bit floating-point TMS320C31 and a SN74ACT3638 bi-directional clocked FIFO
• Download
  How TMS320 Tools Interact With the TMS320C32's Enhanced Memory Interface
  PDF, 160 Kb, File published: Nov 1, 1995
  This document describes using the TMS320 floating-point digital signal processor (DSP) optimizing C compiler and assembly language tools with the variable memory width and data sizes supported by the TMS320C32 ('C32) 32-bit DSP. An overview of the 'C32 strobe control registers is presented along with their configuration for use with a compiler linker or debugger. Different memory configurations
• Download
  Interfacing TI Clocked FIFOs With TI Floating-Point DSPs (Rev. A)
  PDF, 108 Kb, Revision: A, File published: Mar 1, 1996
  FIFO memories are used in digital signal processing systems for matching data paths with asynchronous clock or data rates. This document shows the SN74ACT3632 512?36?2 clocked FIFO as a single-chip bi-directional buffering solution that interfaces to the TI TMS320C3x and TMS320C4x floating-point DSP family. Programmable FIFO flags enable DMA control techniques that are used to handle the data flow
• Download
  Engine Knock Detection Using Spectral Analysis With TMS320C25 or TMS320C30 DSPs
  PDF, 254 Kb, File published: Jan 1, 1995
  An efficient method of detecting combustion engine knock is using spectral analysis. The detection process algorithm adapts to a no-knock reference at varying speeds and loads by using multiple frequencies. This document presents an problem overview current technology and two implementation examples are given to aid in the development of system specific hardware and software. The first system is
• Download
  320C3x 320C4x and 320MCM42x Power-Up Sensitivity at Cold Temperatures (Rev. D)
  PDF, 248 Kb, Revision: D, File published: Aug 6, 2004
  System board-level design and end-equipment environments can impact the operation of specific commercial and military 320C3x (320C30 320C31 320LC31 320C32 and 320VC33) 320C4x (320C40 and 320C44) digital signal processors (DSPs) and the military 320MCM42x (320MCM42C and 320MCM42D) multichip modules (MCMs) during power up. The 320MCM42x MCM incorporates two 320C40 DSP die.Specifically the s
• Download
  Setting Up TMS320 DSP Interrupts in 'C'
  PDF, 168 Kb, File published: Nov 1, 1994
  Four steps are required to set the TMS320 DSP interrupts: create a interrupt service routine initialize the vector table and set the memory map enable the interrupts in the CPU and enable the interrupt sources. This document shows how to set the interrupts in C C callable assembly or in-line C. Sample C code segments are provided. The appendix gives complete examples for setting interrupt vec

Model Line

Manufacturer's Classification

• Semiconductors > Processors > Other Processors