Datasheet Texas Instruments TPS60205DGSRG4

Regulated 3.3-V Low Ripple Charge Pump with Power Good Indicator 10-VSSOP -40 to 85

Datasheets

PDF, 584 Kb, Revision: A, File published: Sep 28, 2001

Extract from the document

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

Iout(Max)	0.1 A
Iq(Typ)	0.035 mA
Operating Temperature Range	-40 to 85 C
Package Group	VSSOP
Rating	Catalog
Regulated Outputs	1
Special Features	Enable,Frequency Synchronization,Power Good
Switching Frequency(Max)	400 kHz
Switching Frequency(Min)	200 kHz
Type	Charge Pump
Vin(Max)	3.6 V
Vin(Min)	1.6 V
Vout(Max)	3.3 V
Vout(Min)	3.3 V

RoHS

Compliant

Download
Optimizing Resistor Dividers at a Comparator (Rev. A)
PDF, 120 Kb, Revision: A, File published: Jun 3, 2013
Download
Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
PDF, 387 Kb, Revision: B, File published: Jun 15, 2017
Download
Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs
PDF, 130 Kb, File published: Sep 19, 2011
Download
Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Series: TPS60205 (4)

Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Charge Pump (Inductorless)