Datasheet Texas Instruments MSP432P401RIPZR
| Manufacturer | Texas Instruments |
| Series | MSP432P401R |
| Part Number | MSP432P401RIPZR |
SimpleLink low-power 32-Bit ARM Cortex-M4F MCU With Precision ADC, 256KB Flash and 64KB RAM 100-LQFP -40 to 85
Datasheets
MSP432P401R, MSP432P401M SimpleLinkв„ў Mixed-Signal Microcontrollers datasheet
PDF, 2.7 Mb, Revision: G, File published: Sep 26, 2017
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 100 |
| Package Type | PZ |
| Industry STD Term | LQFP |
| JEDEC Code | S-PQFP-G |
| Package QTY | 1000 |
| Device Marking | MSP432P401R |
| Width (mm) | 14 |
| Length (mm) | 14 |
| Thickness (mm) | 1.4 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.6 |
| Mechanical Data | Download |
Parametrics
| ADC Channels | 24 |
| ADC Resolution | 14 Bits |
| ADC Sampling Rate | 1 MSPS |
| Active Power | 80 uA/MHz |
| CPU | ARM Cortex-M4F |
| Comparators | 16 |
| DMA | 8 |
| Device Type | MCU |
| Flash | 256 KB |
| Frequency | 48 MHz |
| GPIO | 48,64,84 |
| I2C | 4 |
| Operating Temperature Range | -40 to 85 C |
| Package Group | LQFP |
| RAM | 64 |
| RX Current (Lowest) | N/A mA |
| Reference Type | Internal & External |
| SPI | 8 |
| Security Enabler | Cryptographic acceleration,Debug security,Device identity,Secure FW and SW update,Software IP protection |
| Technology | Host MCUs |
| Throughput(Max) | N/A Mbps |
| Timers - 16-bit | 6 |
| Timers - 32-bit | 2 |
| UART | 4 |
| Vcc range | 1.62,3.7 V |
| Wakeup Time | 8 us |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: CC256XCQFN-EM
CC2564C Dual-Mode BluetoothВ® Controller Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Development Kits: CC3120BOOST
SimpleLinkВ™ Wi-FiВ® CC3120 Wireless Network Processor BoosterPackВ™ Plug-In Module
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: MSP432-DEBUGGERS
Debuggers for MSP432
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: MSP-TS432PZ100
100-pin Target Development Board for SimpleLinkВ™ MSP432P4x MCUs (microcontroller not included)
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: BOOSTXL-SENSORS
Sensors BoosterPack Plug-In Module
Lifecycle Status: Active (Recommended for new designs) - Development Kits: BOOSTXL-K350QVG-S1
Kentec QVGA Display BoosterPack
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: CC3100BOOST
SimpleLinkВ™ Wi-FiВ® CC3100 wireless network processor BoosterPackВ™ plug-in module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: MSP-EXP432P401R
SimpleLinkВ™ MSP432P401R LaunchPadВ™ Development Kit
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: BOOST-CC2564MODA
Dual-mode BluetoothВ® CC2564 module with integrated antenna BoosterPackВ™ plug-in module
Lifecycle Status: Active (Recommended for new designs) - Development Kits: BOOSTXL-EDUMKII
Educational BoosterPack MKII
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: ENERGYTRACE
MSP EnergyTrace Technology
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Getting Started With EEMBCВ® ULPBenchв„ў on MSP-EXP432P401RPDF, 1.2 Mb, File published: Mar 19, 2015
This is a getting started guide for obtaining the ULPMark™-CP score using the Embedded Microprocessor Benchmark Consortium (EEMBC) ULPBench™ and EnergyMonitor with the MSP432P401R microcontroller (MCU). This document uses the MSP‑EXP432P401R LaunchPad™ development kit as the target evaluation module (EVM) for performing the benchmark. ULPBench is an EEMBC benchmark that provides an industry-standa - XMS432P401x Rev. C Preproduction Advisories (Rev. A)PDF, 24 Kb, Revision: A, File published: Jul 11, 2016
XMS432P401x Rev. C Preproduction Advisories - Signal Processing With MSP432 Microcontroller and CMSIS-DSP LibraryPDF, 526 Kb, File published: May 31, 2016
- Multi-Frequency Range and Tunable DCO on MSP432P4xx Microcontrollers (Rev. A)PDF, 80 Kb, Revision: A, File published: Jun 23, 2016
- Proper Sleep and Interrupt Use on the SimpleLinkв„ў MSP432в„ў ARMВ® CortexВ®-M4 MCUsPDF, 28 Kb, File published: Jun 7, 2017
This application note helps developers understand the proper way to go to sleep using the Wait For Interrupt (WFI) instruction in an ARMv7-M or ARMv6-M application, particularly when using the SimpleLink MSP432 microcontrollers. If System Control Register (SCR) bits are not set in a particular order and a Data Synchronization Barrier (DSB) is not executed to flush the data memory transfer pipeline - Designing an Ultra-Low-Power (ULP) Application With SimpleLink MSP432 MCUs (Rev. A)PDF, 487 Kb, Revision: A, File published: Mar 7, 2017
With the growing system complexity in ultra-low-power microcontroller (MCU) applications minimizing the overall energy consumption is one of the most difficult problems to solve. Multiple aspects including silicon other onboard hardware components and application software must be considered. There are some obvious generic techniques that can be used to reduce energy consumption such as reducing - Debugging DriverLib in ROM on MSP432P4xxPDF, 270 Kb, File published: Mar 18, 2015
The MSP432P4xx family includes a complete peripheral driver library (DriverLib) fully integrated into the ROM memory. Developers can leverage the ROM DriverLib for multiple benefits including access to highly robust and tested APIs, single-cycle ROM execution speed at lower power consumption, and freeing up memory space for additional application code. Developers can gain access to ROM APIs by add - Configuring Security and Bootloader (BSL) on MSP432P4xx Microcontrollers (Rev. D)PDF, 55 Kb, Revision: D, File published: Jul 14, 2017
With the increasing threats of IP theft and cyberattack, security has changed from a feature to a basic requirement for any embedded application. The MSP432P4xx family of devices offers a number of security measures to meet the new security requirements including JTAG security, IP protection, and encryption-enabled bootloader (BSL) (formerly known as the bootstrap loader). In addition, the MSP432P - Leveraging Low-Frequency Power Modes on SimpleLinkв„ў MSP432P4xx Microcontrollers (Rev. B)PDF, 86 Kb, Revision: B, File published: Mar 7, 2017
Low power consumption is very important in all battery powered embedded applications. But the operating frequency of these embedded applications can be diverse based the needs of the application. Some applications might require operating at higher frequencies, in the order of several megahertz, while some other applications might require operating at lower frequencies, on the order of a few tens o - Moving From Evaluation to Production With SimpleLinkв„ў MSP432P401x MCUs (Rev. A)PDF, 174 Kb, Revision: A, File published: Mar 7, 2017
This application report is intended for SimpleLink MSP432 microcontroller (MCU) developers currently evaluating the prerelease SimpleLink XMS432P401x Revision B and Revision C devices sampled from www.ti.com/product/msp432p401r. With the change to production silicon, TI recommends updating your device to the most recent revision of the MSP432 device.NOTE: The SimpleLink MSP432 SDK can be used wi - Software IP Protection on MSP432P4xx Microcontrollers (Rev. B)PDF, 1.5 Mb, Revision: B, File published: Nov 28, 2016
Differentiations in embedded software applications enable differentiated products. Companies invest significant money in building differentiated software application. Hence, protecting this investment (application or portions of the application) is extremely important. This application note describes how to protect software intellectual property (IP) running on the Texas Instruments (TI) MSP432P4x - Flash Operations on MSP432 MCUsPDF, 71 Kb, File published: Jul 11, 2016
The flash controller of the MSP432в„ў MCUs is a very powerful and intricate peripheral that has a robust programming model and feature-rich implementation. With a proper software layer, the programmer is able to abstract out the complexities of the flash controller's programming model and keep application code free of any flash controller overhead. Additionally, executing DriverLib from ROM enables - Maximizing MSP432P4xx Voltage Regulator EfficiencyPDF, 1.5 Mb, File published: Mar 19, 2015
This application report describes the relationship of the MSP432P4xx DC-DC and LDO, provides guidelines on choosing which is most efficient for your application, and gives board layout considerations for the DC-DC. - Low-Power Analog Measurements With SimpleLink MSP432 Microcontollers (Rev. A)PDF, 538 Kb, Revision: A, File published: Oct 19, 2017
Ultra-low-power analog measurements are a common requirement in applications such as non-contact power measurement and wireless condition monitoring. Many of these systems are battery based and must achieve extended life while still providing continuous coverage. This application note describes how to utilize the low-power features of the analog-to-digital converter (ADC) with up to 16-bit precisi - BPSK Modem Implementation With SimpleLinkв„ў MSP432в„ў MCUs (Rev. A)PDF, 708 Kb, Revision: A, File published: Sep 18, 2017
This application report introduces how to implement a 125-kbps BPSK modem by taking advantage of the CMSIS DSP Library with on-chip timer and 1-Msps precision analog-to-digital converter (ADC) with up to 16-bit precision on the SimpleLink MSP432P401R microcontroller (MCU). The MSP-EXP432P401R LaunchPad development kit is used as the main development platform. - MSP432 Debugging Tools: Using Serial Wire Output With CCS Trace Analyzer (Rev. A)PDF, 911 Kb, Revision: A, File published: Feb 23, 2016
This application note introduces an ARMВ® hardware-based debugging tool, Serial Wire Output (SWO) Trace. The discussion starts with background information on what happens at a hardware level, to explain what the many capabilities are. Then, it focuses on how the tools are implemented in the TI Code Composer Studioв„ў (CCS) integrated development environment (IDE), compared to other IDEs.In CCS, the - Leveraging Precision ADC on SimpleLink MSP432 MCUs for Predictive Maintenance (Rev. A)PDF, 506 Kb, Revision: A, File published: Sep 18, 2017
This application report describes a high-performance method for predictive maintenance of motors by monitoring their frequency response with the SimpleLink MSP432P401R microcontroller using precision ADC with up to 16-bit ENOB and FFT analysis. - Migrating to the SimpleLink MSP432 Family (Rev. D)PDF, 366 Kb, Revision: D, File published: Oct 19, 2017
The 16-bit MSP430 and the 32-bit SimpleLink MSP432 microcontroller (MCU) families complement each other in low-power and performance. The goal of this migration guide is to help developers accurately assess the effort to migrate an existing application from the 16-bit MSP430 to the 32-bit SimpleLink MSP432 Arm platform if they so choose to. Ultimately the migration guide is built to help derive a
Model Line
Series: MSP432P401R (11)
Manufacturer's Classification
- Semiconductors > Microcontrollers (MCU) > SimpleLink MCUs > SimpleLink MSP432 MCUs
