Datasheet Texas Instruments THS4304DRG4
| Manufacturer | Texas Instruments |
| Series | THS4304 |
| Part Number | THS4304DRG4 |
Wideband Operational Amplifier 8-SOIC -40 to 85
Datasheets
THS4304: Wideband Operational Amplifier datasheet
PDF, 1.5 Mb, Revision: A, File published: Jul 30, 2004
Extract from the document
Prices
Status
| Lifecycle Status | Obsolete (Manufacturer has discontinued the production of the device) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Download |
Parametrics
| 2nd Harmonic(dBc) | 84 |
| 3rd Harmonic(dBc) | 100 |
| @ MHz | 10 |
| Acl, min spec gain(V/V) | 1 |
| Additional Features | N/A |
| Approx. Price (US$) | 2.41 | 1ku |
| Architecture | Bipolar Voltage FB |
| BW @ Acl(MHz) | 3000 |
| CMRR(Min)(dB) | 80 |
| CMRR(Typ)(dB) | 95 |
| GBW(Typ)(MHz) | 3000 |
| Input Bias Current(Max)(pA) | 12000000 |
| Iq per channel(Max)(mA) | 18.9 |
| Iq per channel(Typ)(mA) | 18 |
| Number of Channels(#) | 1 |
| Offset Drift(Typ)(uV/C) | 5 |
| Operating Temperature Range(C) | -40 to 85 |
| Output Current(Typ)(mA) | 100 |
| Package Group | SOIC |
| Package Size: mm2:W x L (PKG) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) |
| Rail-to-Rail | In Out |
| Rating | Catalog |
| Slew Rate(Typ)(V/us) | 790 |
| Total Supply Voltage(Max)(+5V=5, +/-5V=10) | 5 |
| Total Supply Voltage(Min)(+5V=5, +/-5V=10) | 2.7 |
| Vn at Flatband(Typ)(nV/rtHz) | 2.4 |
| Vos (Offset Voltage @ 25C)(Max)(mV) | 4 |
Eco Plan
| RoHS | Not Compliant |
| Pb Free | No |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: THS4304DGKEVM
THS4304 Evaluation Module for DGK Package
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: THS4304DBVEVM
THS4304 Evaluation Module for DBV Package
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- RF and IF amplifiers with op ampsPDF, 177 Kb, File published: Feb 28, 2005
- Wideband Complementary Current Output DAC Single-Ended InterfacePDF, 597 Kb, File published: Jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Model Line
Series: THS4304 (9)
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)
