Datasheet Texas Instruments TPS62200DBVRG4

ManufacturerTexas Instruments
SeriesTPS62200
Part NumberTPS62200DBVRG4
Datasheet Texas Instruments TPS62200DBVRG4

Adjustable, 300-mA, 95% Efficient Step-Down Converter in SOT-23 5-SOT-23 -40 to 85

Datasheets

TPS6220x High-Efficiency, SOT23 Step-Down, DC-DC Converter datasheet
PDF, 1.2 Mb, Revision: F, File published: Jun 30, 2015
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin5
Package TypeDBV
Industry STD TermSOT-23
JEDEC CodeR-PDSO-G
Package QTY3000
CarrierLARGE T&R
Device MarkingPHKI
Width (mm)1.6
Length (mm)2.9
Thickness (mm)1.2
Pitch (mm).95
Max Height (mm)1.45
Mechanical DataDownload

Parametrics

Control ModeVoltage Mode
Duty Cycle(Max)100 %
Iout(Max)0.3 A
Iq(Typ)0.015 mA
Operating Temperature Range-40 to 85 C
Package GroupSOT-23
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Light Load Efficiency,Synchronous Rectification
Switching Frequency(Max)1500 kHz
Switching Frequency(Min)650 kHz
TypeConverter
Vin(Max)6 V
Vin(Min)2.5 V
Vout(Max)6 V
Vout(Min)0.7 V

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: TPS62203EVM-211
    TPS62203 6V Input, 3.3V Output, 0.3A Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS62200EVM-211
    TPS62200 6V Input, 1.8V Output, 0.3A Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • DVS For OMAP1510 Using TPS62200
    PDF, 61 Kb, File published: Dec 4, 2002
    Portable electronics with long battery lives are unquestionably more marketable. Power consumption of the microprocessor can be reduced by lowering the internal clock frequency and/or even more by lowering the core supply voltage. Dynamic voltage scaling (DVS) is used to reduce core supply voltage to minimize power consumption. This application note explains how to implement DVS using a TPS6220
  • Power Ref Design for TMS320C6472 5Vin DC/DC Converters (1x C6472)
    PDF, 251 Kb, File published: Mar 31, 2010
    This reference design is intended for designers who wish to design a TMS320C6472 Digital Signal Processor into a system using a nominal input voltage of 5 V, DC/DC converters with integrated FETs, and allowing for ease-of-design and a smaller solution size.
  • Power Solution Using Discrete DC/DC Converters and LDOs (Rev. B)
    PDF, 299 Kb, Revision: B, File published: Aug 26, 2010
  • Design considerations for a resistive feedback divider in a DC/DC converter
    PDF, 393 Kb, File published: Apr 26, 2012
  • Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
    PDF, 1.1 Mb, Revision: A, File published: May 11, 2015
  • Five steps to a great PCB layout for a step-down converter
    PDF, 162 Kb, File published: Jan 29, 2015
  • Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)
    PDF, 755 Kb, Revision: A, File published: Jan 13, 2012
  • Testing tips for applying external power to supply outputs without an input volt
    PDF, 110 Kb, File published: Oct 24, 2016
  • Basic Calculation of a Buck Converter's Power Stage (Rev. B)
    PDF, 202 Kb, Revision: B, File published: Aug 17, 2015
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, Revision: B, File published: Jun 15, 2017
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, File published: Jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Model Line

Series: TPS62200 (4)

Manufacturer's Classification

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)