Datasheet Texas Instruments TS5A3159DBVTE4

ManufacturerTexas Instruments
SeriesTS5A3159
Part NumberTS5A3159DBVTE4
Datasheet Texas Instruments TS5A3159DBVTE4

1-Ohm SPDT Analog Switch 6-SOT-23 -40 to 85

Datasheets

TS5A3159 1-Ω SPDT Analog Switch datasheet
PDF, 1.1 Mb, Revision: D, File published: Nov 19, 2015
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin66
Package TypeDBVDBV
Industry STD TermSOT-23SOT-23
JEDEC CodeR-PDSO-GR-PDSO-G
Package QTY250250
CarrierSMALL T&RSMALL T&R
Device MarkingJA8KJA8R
Width (mm)1.61.6
Length (mm)2.92.9
Thickness (mm)1.21.2
Pitch (mm).95.95
Max Height (mm)1.451.45
Mechanical DataDownloadDownload

Parametrics

Additional FeaturesBreak-before-make
Bandwidth100 MHz
Bandwidth(Max)100 MHz
Configuration2:1 SPDT
ESD Charged Device Model1 kV
ESD HBM2 kV
Input/Ouput Voltage(Max)5.5 V
Input/Output Continuous Current(Max)200 mA
Input/Output OFF-state Capacitance(Typ)23 pF
Input/Output ON-state Capacitance(Typ)84 pF
Number of Channels1
OFF-state leakage current(Max)0.02 µA
ON-state leakage current(Max)0.04 µA
Operating Temperature Range-40 to 85 C
Package GroupSOT-23
Package Size: mm2:W x L6SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG
RatingCatalog
Ron(Max)3.2 Ohms
Ron(Typ)0.75 Ohms
Supply Current(Max)0.1 uA
Supply Current(Typ)0.01 uA
Supply Range5.5 Max
VIH(Min)1.5 V
VIL(Max)0.8 V
Vdd(Max)5.5 V
Vdd(Min)1.65 V
Vss(Max)N/A V
Vss(Min)N/A V

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Development Kits: CC2650STK
    SimpleLinkВ™ Bluetooth low energy/Multi-standard SensorTag
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Accurately measuring ADC driving-circuit settling time (Rev. A)
    PDF, 107 Kb, Revision: A, File published: May 18, 2015
  • Using ADS8411 in a Multiplexed Analog Input Application (Rev. A)
    PDF, 2.1 Mb, Revision: A, File published: Feb 15, 2006
    This application report is intended as a guide for using an analog multiplexer to multiplex several input signals to a single high-resolution, high-speed SAR analog-to-digital converter (ADC). The ADC and the multiplexer used were the ADS8411 and the TS5A3159/3359, respectively. This document discusses the important parameters of a multiplexer and defines a few important measurements for evaluatin
  • Preventing Excess Power Consumption on Analog Switches
    PDF, 238 Kb, File published: Jul 3, 2008
    Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For most analog switches, this application condition leads to an excess supply current draw that catches system designers by surprise. This applica

Model Line

Manufacturer's Classification

  • Semiconductors > Switches and Multiplexers > Analog Switches/Muxes