Datasheet Texas Instruments LM337LZ/LFT3

ManufacturerTexas Instruments
SeriesLM337L
Part NumberLM337LZ/LFT3
Datasheet Texas Instruments LM337LZ/LFT3

100mA Adjustable Output Negative Voltage Regulator 3-TO-92

Datasheets

LM337L 3-Terminal Adjustable Regulator datasheet
PDF, 1.4 Mb, Revision: E, File published: Dec 9, 2016
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Packaging

Pin33
Package TypeLPLP
Industry STD TermTO-92TO-92
JEDEC CodeO-PBCY-WO-PBCY-W
Package QTY20002000
Device MarkingLM337LZ
Width (mm)4.34.3
Length (mm)4.34.3
Thickness (mm)3.63.6
Pitch (mm)1.271.27
Max Height (mm)5.345.34
Mechanical DataDownloadDownload

Parametrics

Accuracy1.4 %
Iout(Max)0.1 A
Iq(Typ)0.05 mA
Noise38 uVrms
Operating Temperature Range-25 to 100 C
Output Capacitor TypeNon-Ceramic
Output OptionsAdjustable Output,Negative Output
Package GroupTO-92
Package Size: mm2:W x L3TO-92: 18 mm2: 4.3 x 4.3(TO-92) PKG
RatingCatalog
Regulated Outputs1
Special FeaturesN/A
Thermal Resistance ОёJA111 В°C/W
Vdo(Typ)2200 mV
Vin(Max)-4.2 V
Vin(Min)-40 V
Vout(Max)-1.2 V
Vout(Min)-37 V

Eco Plan

RoHSCompliant

Application Notes

  • A Topical Index of TI LDO Application Notes (Rev. F)
    PDF, 82 Kb, Revision: F, File published: Jun 27, 2019
  • Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)
    PDF, 509 Kb, Revision: A, File published: Jun 4, 2008
  • Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A)
    PDF, 284 Kb, Revision: A, File published: May 5, 2013
    When working with voltage regulator circuits the designer is often confronted with the need to calculatethe tolerance of the regulated output voltage. For fixed voltage regulators this problem is easily managedbecause the required information is directly supplied on the semiconductor manufacturer's data sheet.
  • AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B)
    PDF, 300 Kb, Revision: B, File published: May 6, 2013
    This application note discusses the operation and compensation of linear regulators.
  • AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)
    PDF, 814 Kb, Revision: A, File published: May 6, 2013
    The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t
  • Understanding the Terms and Definitions of LDO Voltage Regulators
    PDF, 197 Kb, File published: Oct 21, 1999
    This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab
  • TO-92 Packing Options / Ordering Instructions (Rev. A)
    PDF, 287 Kb, Revision: A, File published: Jun 23, 2010
  • Packaging Limits Range of Linear Regulators
    PDF, 75 Kb, File published: May 8, 2010
    The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.

Model Line

Manufacturer's Classification

  • Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO