Datasheet Texas Instruments LM140K-12
| Manufacturer | Texas Instruments |
| Series | LM140K |
| Part Number | LM140K-12 |
1A Fixed Output Linear Regulator / LDO 2-TO-3 -55 to 125
Datasheets
LM140K Series 3-Terminal Positive Regulators datasheet
PDF, 1.3 Mb, File published: Jul 11, 2013
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 2 | 2 |
| Package Type | NDS | NDS |
| Industry STD Term | TO-CAN | TO-CAN |
| JEDEC Code | X-MSFM-P | X-MSFM-P |
| Package QTY | 50 | 50 |
| Device Marking | 12P+ | LM140K |
| Width (mm) | 25.4 | 25.4 |
| Length (mm) | 38.94 | 38.94 |
| Thickness (mm) | 8.6 | 8.6 |
| Max Height (mm) | 8.94 | 8.94 |
| Mechanical Data | Download | Download |
Parametrics
| Accuracy | 4 % |
| Fixed Output Options | 5,12,15 V |
| Iout(Max) | 1 A |
| Iq(Typ) | 7 mA |
| Noise | 40 uVrms |
| Operating Temperature Range | -55 to 125 C |
| Output Capacitor Type | N/A |
| Output Options | Fixed Output |
| PSRR @ 100KHz | 50 dB |
| Package Group | TO-3 |
| Package Size: mm2:W x L | 2TO-3: 969 mm2: 24.89 x 38.94(TO-3) PKG |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | N/A |
| Thermal Resistance ОёJA | 39 В°C/W |
| Vdo(Typ) | 2500 mV |
| Vin(Max) | 35 V |
| Vin(Min) | 17.6 V |
| Vout(Max) | 15 V |
| Vout(Min) | 5 V |
Eco Plan
| RoHS | See ti.com |
Application Notes
- A Topical Index of TI LDO Application Notes (Rev. F)PDF, 82 Kb, Revision: F, File published: Jun 27, 2019
- Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)PDF, 509 Kb, Revision: A, File published: Jun 4, 2008
- Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A)PDF, 284 Kb, Revision: A, File published: May 5, 2013
When working with voltage regulator circuits the designer is often confronted with the need to calculatethe tolerance of the regulated output voltage. For fixed voltage regulators this problem is easily managedbecause the required information is directly supplied on the semiconductor manufacturer's data sheet. - AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B)PDF, 300 Kb, Revision: B, File published: May 6, 2013
This application note discusses the operation and compensation of linear regulators. - AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)PDF, 814 Kb, Revision: A, File published: May 6, 2013
The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t - Understanding the Terms and Definitions of LDO Voltage RegulatorsPDF, 197 Kb, File published: Oct 21, 1999
This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab - Packaging Limits Range of Linear RegulatorsPDF, 75 Kb, File published: May 8, 2010
The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.
Model Line
Series: LM140K (6)
Manufacturer's Classification
- Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO
Other Names:
LM140K12, LM140K 12
