Datasheet Texas Instruments REG1117FA/500
| Manufacturer | Texas Instruments |
| Series | REG1117A |
| Part Number | REG1117FA/500 |
1A Low Dropout Positive Regulator 3-DDPAK/TO-263 0 to 125
Datasheets
REG1117: 800mA 1A Low Dropout Pos Regulator 1.8, 2.5, 2.85, 3.3, 5V, Adjustable datasheet
PDF, 846 Kb, Revision: D, File published: Jul 21, 2004
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 3 |
| Package Type | KTT |
| Industry STD Term | TO-263 |
| JEDEC Code | R-PSFM-G |
| Package QTY | 500 |
| Carrier | LARGE T&R |
| Device Marking | REG1117FA |
| Width (mm) | 8.41 |
| Length (mm) | 10.18 |
| Thickness (mm) | 4.44 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 4.83 |
| Mechanical Data | Download |
Parametrics
| Accuracy | 2 % |
| Fixed Output Options | 1.8,2.5,5 V |
| Iout(Max) | 1 A |
| Iq(Typ) | 4 mA |
| Noise | 38 uVrms |
| Operating Temperature Range | 0 to 125 C |
| Output Capacitor Type | Non-Ceramic |
| Output Options | Adjustable Output,Fixed Output |
| PSRR @ 100KHz | 29 dB |
| Package Group | DDPAK/TO-263 |
| Package Size: mm2:W x L | 3DDPAK/TO-263: 155 mm2: 15.24 x 10.16(DDPAK/TO-263) PKG |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | N/A |
| Thermal Resistance ОёJA | 65 В°C/W |
| Vdo(Typ) | 1200 mV |
| Vin(Max) | 15 V |
| Vin(Min) | 3.7 V |
| Vout(Max) | 13.8 V |
| Vout(Min) | 1.25 V |
Eco Plan
| RoHS | Compliant |
Application Notes
- An Easy Solution to Current Limiting an Op AmpPDF, 35 Kb, File published: Oct 2, 2000
Many circuits today not only require voltage regulation but they also need current regulation. Some systems draw excessive current during power on, which can cause expensive system components to burn up due to improper powering of supplies. This is not the only problem associated with excessive currents. Some applications need to limit the current an op amp can provide to a specific load. This cir - LDO Noise Demystified (Rev. A)PDF, 785 Kb, Revision: A, File published: Aug 9, 2017
Thisapplicationreportexplainsthe differencebetweennoiseand PSRRof an LDO.It also explainsthedifferentwaysnoiseis specifiedin LDOdatasheetsandwhichspecificationshouldbe usedin theapplication.Finallyit explainshow LDOnoiseis reduced. - LDO PSRR Measurement Simplified (Rev. A)PDF, 131 Kb, Revision: A, File published: Aug 9, 2017
This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods - Packaging Limits Range of Linear RegulatorsPDF, 75 Kb, File published: May 8, 2010
The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.
Model Line
Series: REG1117A (24)
- REG1117A REG1117A-1.8 REG1117A-1.8/2K5 REG1117A-1.8G4 REG1117A-2.5 REG1117A-2.5/2K5 REG1117A-2.5G4 REG1117A/2K5 REG1117A/2K5G4 REG1117AG4 REG1117FA REG1117FA-1.8 REG1117FA-1.8KTTT REG1117FA-2.5 REG1117FA-2.5/500 REG1117FA-2.5KTTT REG1117FA-5.0 REG1117FA-5.0/500 REG1117FA-5.0KTTT REG1117FA-5.0KTTTG REG1117FA/500 REG1117FA1.8KTTTG3 REG1117FA2.5KTTTG3 REG1117FAKTTT
Manufacturer's Classification
- Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO
