Datasheet Texas Instruments LMH6629SDE/NOPB
| Manufacturer | Texas Instruments |
| Series | LMH6629 |
| Part Number | LMH6629SDE/NOPB |
Ultra-Low Noise, High-Speed Operational Amplifier with Shutdown 8-WSON -40 to 125
Datasheets
LMH6629 Ultra-Low Noise, High-Speed Operational Amplifier with Shutdown datasheet
PDF, 9.2 Mb, Revision: I, File published: Dec 5, 2014
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 8 |
| Package Type | NGQ |
| Industry STD Term | WSON |
| JEDEC Code | S-PDSO-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | L6629 |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .8 |
| Pitch (mm) | .5 |
| Max Height (mm) | .8 |
| Mechanical Data | Download |
Parametrics
| 2nd Harmonic | 88 dBc |
| 3rd Harmonic | 74 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 4 V/V |
| Additional Features | Decompensated |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 900 MHz |
| CMRR(Min) | 82 dB |
| CMRR(Typ) | 87 dB |
| GBW(Typ) | 4000 MHz |
| Input Bias Current(Max) | 23000 pA |
| Iq per channel(Max) | 16.7 mA |
| Iq per channel(Typ) | 15.5 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 0.45 uV/C |
| Operating Temperature Range | -40 to 125,-40 to 85 C |
| Output Current(Typ) | 250 mA |
| Package Group | WSON |
| Package Size: mm2:W x L | See datasheet (WSON) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 1100 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 0.69 nV/rtHz |
| Vn at Flatband(Typ) | 0.69 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.78 mV |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: LMH6629SDEVAL
Evaluation Board for the LMH6629
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LMH730316
LMH730316 Evaluation Board for High-Speed Single Op Amp in the 5-/6-Pin SOT-23 Package
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- AN-1604 Decompensated Operational Amplifiers (Rev. B)PDF, 206 Kb, Revision: B, File published: May 1, 2013
This application report discusses the what, why, and where of decompensated op amps. This applicationreport also describes external compensation techniques, such as reducing loop gain, to stabilize op ampsoperated at gains less than the minimum stable gain specified in the datasheet. A comprehensivetreatment of input lead-lag compensation including examples is presented. - OA-14 Improving Amplifier Noise for High 3rd Intercept Amplifiers (Rev. F)PDF, 594 Kb, Revision: F, File published: May 1, 2013
This application report discusses improving Amplifier Noise for High 3rd Intercept Amplifiers. - Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A)PDF, 153 Kb, Revision: A, File published: May 16, 2017
This application note is intended as a guide for the designer looking to amplify the small signal from a photodiode or avalanche diode so that it would be large enough for further processing (e.g. data acquisition) or to trigger some other event in a system. The challenge in doing so, as always, is to not degrade the signal such that it becomes indistinguishable from random noi - Considerations for High-Gain Multistage DesignsPDF, 347 Kb, File published: May 13, 2013
Model Line
Series: LMH6629 (7)
- LMH6629 MDC LMH6629MF/NOPB LMH6629MFE/NOPB LMH6629MFX/NOPB LMH6629SD/NOPB LMH6629SDE/NOPB LMH6629SDX/NOPB
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)
