Datasheet Texas Instruments BUF634F/500

250mA High-Speed Buffer 5-DDPAK/TO-263 -40 to 125

Datasheets

PDF, 1.2 Mb, Revision: A, File published: Nov 25, 2015

Extract from the document

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Diff Gain	0.4 %
Diff Phase	0.1 deg
Number of Channels	1
Operating Temperature Range	-40 to 125 C
Output Current(Typ)	250 mA
Package Group	DDPAK/TO-263
Package Size: mm2:W x L	5DDPAK/TO-263: 155 mm2: 15.24 x 10.16(DDPAK/TO-263) PKG
Rating	Catalog
Vs(Max)	36 V
Vs(Min)	4.5 V

RoHS	Compliant
Pb Free	Yes

Download
Power Amplifier Stress and Power Handling Limitations
PDF, 55 Kb, File published: Sep 27, 2000
To achieve reliable power amplifier designs you must consider the stress on the amplifier compared to its power handling limitations. Power handling limits are specified by the Safe Operating Area (SOA) curves of the power amp. Stress on the amplifier depends on amplifier load and signal conditions which can be evaluated with straightforward techniques.
Download
Add Current Limit to the BUF634
PDF, 63 Kb, File published: Sep 27, 2000
Modern buffer amplifiers, such as the BUF634, are often used with op amps to drive high-current demand loads such as cables or eletro-mechanical devices. BUF634 features internal overload protection to prevent its destruction under fault conditions. Internal current limit protects circuitry and wirebonds from excessive current. Internal over-temp shut down protects the device from excessive temper
Download
Combining an Amplifier with the BUF634
PDF, 72 Kb, File published: Oct 2, 2000
The following application note descibes a combination using an op amp with the high-speed buffer BUF634 located in its feedback loop. Depending upon the op amp selected, large signals with output currents of over 500mA into the MHz range can be attained.

Series: BUF634 (12)