Datasheet Texas Instruments LMC6482IMX
| Manufacturer | Texas Instruments |
| Series | LMC6482 |
| Part Number | LMC6482IMX |
Ultra-low Bias Current, Precision CMOS Rail-to-Rail Input and Output Operational Amplifier 8-SOIC -40 to 85
Datasheets
LMC6482 CMOS Dual Rail-to-Rail Input and Output Operational Amplifier datasheet
PDF, 2.9 Mb, Revision: E, File published: Apr 24, 2015
Extract from the document
Prices
Status
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 8 | 8 |
| Package Type | D | D |
| Industry STD Term | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 2500 | 2500 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | LMC64 | 82IM |
| Width (mm) | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 |
| Mechanical Data | Download | Download |
Replacements
| Replacement | LMC6482IMX/NOPB |
| Replacement Code | S |
Parametrics
| Additional Features | N/A |
| Architecture | CMOS |
| CMRR(Min) | 65 dB |
| CMRR(Typ) | 82 dB |
| GBW(Typ) | 1.5 MHz |
| Input Bias Current(Max) | 4 pA |
| Iq per channel(Max) | 0.7 mA |
| Iq per channel(Typ) | 0.5 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 1 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 30 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | In,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 1.3 V/us |
| Total Supply Voltage(Max) | 15.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 3 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 37 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.75 mV |
Eco Plan
| RoHS | See ti.com |
Application Notes
- AN-1237 RSDSв„ў Flat Panel Display Design Guidelines Part 2 (Rev. A)PDF, 194 Kb, Revision: A, File published: May 6, 2013
This application report presents part 2 of the flat panel display design guidelines. - AN-1234 RSDSв„ў Flat Panel Display Design Guidelines Part 1 (Rev. A)PDF, 245 Kb, Revision: A, File published: May 6, 2013
This application report outlines the total system solution that Texas Instruments provides for flat panel displays (FPDs). The described design uses an reduced swing differential signaling (RSDS) interface technology for reduced power, reduced board size, reduced component count, and reduced EMI. This document is currently applicable to XGA and SXGA notebook and monitor applications. - AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, Revision: A, File published: Apr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or - Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)PDF, 81.7 Mb, Revision: B, File published: Apr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
Model Line
Series: LMC6482 (14)
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps
