Datasheet Texas Instruments TUSB3410IRHB
| Manufacturer | Texas Instruments |
| Series | TUSB3410 |
| Part Number | TUSB3410IRHB |
UART/I2C/IrDA Serial Port to USB Bridge 32-VQFN -40 to 85
Datasheets
TUSB3410 USB to Serial Port Controller datasheet
PDF, 2.5 Mb, Revision: J, File published: Jul 10, 2017
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 32 |
| Package Type | RHB |
| Industry STD Term | VQFN |
| JEDEC Code | S-PQFP-N |
| Package QTY | 73 |
| Carrier | TUBE |
| Device Marking | 3410I |
| Width (mm) | 5 |
| Length (mm) | 5 |
| Thickness (mm) | .9 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | Download |
Parametrics
| Operating Temperature Range | -40 to 85,0 to 70 C |
| Package Group | VQFN |
| Package Size: mm2:W x L | 32VQFN: 25 mm2: 5 x 5(VQFN) PKG |
| Rating | Catalog |
| USB Speed | 12 Mbps |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TDP158RSBEVM
6 Gbps AC Coupled to TMDSВ™/HDMIВ™ Redriver Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: TUSB3410UARTPDK
TUSB3410UARTPDK Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: DP149RSBEVM
DP149 3.4 Gbps DP++ to HDMI Retimer Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: TMDS181RGZEVM
TMDS181RGZ 6 Gbps TMDS Retimer Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: DP159RSBEVM
DP159RSBEVM Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: TMDS171RGZEVM
TMDS171RGZ 3.4 Gbps TMDS Retimer Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: DP159RGZEVM
DP159RGZEVM Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: USB-CTM-MINIDK-EVM
USB Type-Cв„ў Minidock Board With Video and Charging Support Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- USB/Serial Applications Using TUSB3410 VCP Software (Rev. F)PDF, 271 Kb, Revision: F, File published: Jun 8, 2011
- TUSBWINVCP Customization GuidePDF, 320 Kb, File published: Jun 17, 2011
- VIDs, PIDs, and Firmware: Design Decisions When Using TI USB Device ControllersPDF, 162 Kb, File published: Sep 24, 2003
System designers using TI USB controller devices must make certain design decisions involving the vendor ID (VID) and product ID (PID) of the USB device and the location of firmware. If these are not configured properly, the device will not be enumerated correctly by the USB host.This document discusses how these are handled within a system using one of the TI USB device controllers. These con - MSP430 USB Connectivity Using TUSB3410 (Rev. A)PDF, 923 Kb, Revision: A, File published: Oct 9, 2006
This application report presents a ready-to-use USB connectivity reference design for MSP430 microcontrollers using the Texas Instruments TUSB3410 USB-to-serial bridge controller. The provided solution enables high-speed data transfers with speeds of up to 921,600 bit/s as well as MSP430 Flash code download through the USB port. The reference design includes MSP430 and PC software, drivers, schema - TMS320F280x DSC USB Connectivity Using TUSB3410 USB-to-UART Bridge ChipPDF, 511 Kb, File published: May 26, 2006
USB connectivity on the TMS320F280xв„ў family of Digital Signal Controllers may be achieved using the TUSB3410 USB 2.0 to UART bridge chip. All needed USB descriptors and firmware for the TUSB3410 device are bootable from the on-chip memory of the TMS320F280x device through the I2C port, and hence an external EEPROM is not needed in the system. A USB development system for the TMS320F2808 is e
Model Line
Series: TUSB3410 (12)
Manufacturer's Classification
- Semiconductors > Interface > USB > USB Controllers and Transceivers
