Datasheet Texas Instruments TMS320R2812ZHHS

Manufacturer	Texas Instruments
Series	TMS320R2812
Part Number	TMS320R2812ZHHS

32-Bit Digital Signal Controller with RAM 179-BGA MICROSTAR -40 to 125

Datasheets

Download

PDF, 2.5 Mb, Revision: C, File published: Jun 26, 2006

Extract from the document

TMS320R2811, TMS320R2812
Digital Signal Processors Data Manual Literature Number: SPRS257C
June 2004 -Revised June 2006

!
! Revision History REVISION HISTORY
This data sheet revision history highlights the technical changes made to the SPRS257B
device-specific data sheet to make it an SPRS257C revision.
PAGE
NO. ADDITIONS/CHANGES/DELETIONS 13 Changed Temperature Options bullet in Features list 15 Added a separate row to Table 2-1 Hardware Features to modify Q temperature options 20 Modified symbol (В§) note in Table 2-2 23 Modified Note in description of TRST in Table 2-2 23-24 Modified description of EMU0 and EMU1 in Table 2-2 31 Modified memory map in Figure 3-2 32 Modified memory map in Figure 3-3 87 Added the ZHH package to the Absolute Maximum Ratings table (6.1) 88 Added X1 to XCLKIN in the Recommended Operating Conditions table (6.2) 93 Modified XCLKIN values in Table 6-3 100 Modified note under Table 6-9 100 Modified note under Table 6-10 and changed values from MIN to MAX 100 Moved values from MIN to MAX in Table 6-12 101 Moved values from MIN to MAX in Table 6-14 102 Modified note C in Figure 6-13 103 Modified the last symbol note (||) in Table 6-16 109 Modified note in Figure 6-22 111 Modified note in Figure 6-23 105 Modified note on Table 6-19 105 Modified note on Table 6-20 113 Modified note on Figure 6-24 127 Deleted last sentence in the fifth paragraph under section 6.27 XHOLD and XHOLDA 131 Modified gain error and internal voltage reference values in Table 6-41 June 2004 -Revised June 2006 SPRS257C 3 Revision History This page intentionally left blank. 4 SPRS257C June 2004 -Revised June 2006 Contents Contents
Section
1
2 3 4 Page Features .
Introduction .
2.1
Description 2.2
Device Summary 2.3
Pin Assignments .
2.3.1
Terminal Assignments for the GHH and ZHH Packages . …

Prices

Status

Lifecycle Status	Obsolete (Manufacturer has discontinued the production of the device)
Manufacture's Sample Availability	No

Packaging

Pin	179	179
Package Type	ZHH	ZHH
Industry STD Term	BGA MICROSTAR	BGA MICROSTAR
JEDEC Code	S-PBGA-N	S-PBGA-N
Device Marking	R2812ZHHS	TMS320
Width (mm)	12	12
Length (mm)	12	12
Thickness (mm)	.9	.9
Pitch (mm)	.8	.8
Max Height (mm)	1.4	1.4
Mechanical Data	Download	Download

Parametrics

ADC (Ch)	16
Additional Features	External Interface (XINTF) Single Zone Code Security 32-bit CPU Timers Watchdog Timer 2-pin Oscillator AEC-Q100 Automotive Qual
Analog to Digital Converter (ADC)	ADC12: 2-S/H 12.5-MSPS
Approx. Price (US$)	10.65 \| 1ku
CAP	6
CPU	C28x
Frequency(MHz)	150
GPIO	56
Operating Temperature Range(C)	-40 to 125 -40 to 85
Other Actuation Features	N/A
Other Connectivity Features	McBSP CAN
Other Sensing Features	N/A
PWM Technology Type	EV
PWM(Ch)	16
Package Group	BGA MICROSTAR
Package Size: mm2:W x L (PKG)	179BGA MICROSTAR: 144 mm2: 12 x 12(BGA MICROSTAR)
Processing Accelerators	N/A
QEP	2
RAM(KB)	40
Rating	Catalog
SPI	1
Total Processing (MIPS)	150
UART	2

Eco Plan

RoHS	Not Compliant
Pb Free	No

Design Kits & Evaluation Modules

JTAG Emulators/ Analyzers: C2000-GANG
C2000 Gang Programmer
Lifecycle Status: Active (Recommended for new designs)
- Download
JTAG Emulators/ Analyzers: TMDSEMU100V2U-20T
XDS100v2 JTAG Debug Probe (20-pin cTI version)
Lifecycle Status: Active (Recommended for new designs)
JTAG Emulators/ Analyzers: TMDSEMU100V2U-14T
XDS100v2 JTAG Debug Probe (14-pin TI version)
Lifecycle Status: Active (Recommended for new designs)
JTAG Emulators/ Analyzers: TMDSEMU200-U
XDS200 USB Debug Probe
Lifecycle Status: Active (Recommended for new designs)
JTAG Emulators/ Analyzers: TMDSEMU560V2STM-UE
XDS560v2 System Trace USB & Ethernet Debug Probe
Lifecycle Status: Active (Recommended for new designs)
JTAG Emulators/ Analyzers: TMDSEMU560V2STM-U
XDS560v2 System Trace USB Debug Probe
Lifecycle Status: Active (Recommended for new designs)

Application Notes

Download
TMS320F281x Boot ROM Serial Flash Programming
PDF, 5.5 Mb, File published: Oct 11, 2007
This application report describes the implementation of TI's Flash application program interface (API), the software interface to TI's Flash algorithms. Understanding the fundamentals of the Flash API documentation prior to using this application report is important. This document does not replace the Flash API documentation; instead, it guides you among several sets of TI documentation with the F
Download
Signal Conditioning an LVDT Using a TMS320F2812 DSP
PDF, 428 Kb, File published: Aug 15, 2003
A linear variable differential transformer (LVDT) is a type of electro-mechanical transducer capable of measuring linear displacement with a high degree of accuracy. The transducer requires external electronic circuitry to produce a stable reference oscillator, and condition the return signal in order to determine displacement. Traditional LVDT circuits are based on analog design techniques, and s
Download
Programming Examples for the TMS320x28xx eCAN (Rev. B)
PDF, 73 Kb, Revision: B, File published: Sep 12, 2017
The TMS320x28xx series of Microcontrollers/Digital Signal Controllers feature an on-chip enhanced Controller Area Network (eCAN) module. This module is a full-CAN controller, compliant with CAN specification 2.0B. This application report contains several programming examples, supplemental to those in C2000Ware/controlSUITE, to illustrate how the eCAN module is set up for different modes of operati
Download
DSP Control of Electro-Hydraulic Servo Actuators
PDF, 574 Kb, File published: Jan 28, 2005
Hydraulic actuators are characterized by their ability to impart large forces at high speeds and are used in many industrial motion systems. In applications where good dynamic performance is important it is common to contain the actuator in a servo loop comprising a feedback transducer and electronic controller. The majority of electronic servo-controllers used in these systems are analogue based
Download
Spread-Frequency Shift Keying Power Line Modem Software Architecture
PDF, 703 Kb, File published: Jun 16, 2006
This application report describes the software architecture and design of the Spread-Frequency Shift Keying Power Line Modem demonstration platform. Each demonstration unit consists of an eZdsp DSP developer's board plus a daughter card. The daughter card contains electronics that shape and amplify the power line communications (PLC) transmit signal, filter the PLC receive signal, handle RS-232 se
Download
DSP Solutions for the Switched Reluctance Motor
PDF, 112 Kb, File published: Jan 1, 1997
This document deals with solutions to control a switched reluctance motor using the TMS320C24x. This new DSP family enables cost-effective design of intelligent controllers for switched reluctance motors. Two speed control algorithms are presented, they allow the Switched Reluctance motor drive to reach high efficiency, smooth operation, very good dynamic behavior, very high speed and low acoustic
Download
A Variable-Speed Sensorless Drive System for Switched Reluctance Motors
PDF, 246 Kb, File published: Oct 30, 1999
With the advent of high-speed digital signal processors (DSPs) specialized for motion control applications, it has become possible to control motors without mechanical (speed or position) sensors. This is achieved by algorithms that estimate the desired quantities in real time, based on the electrical signals in the motor windings. Benefits include cost savings and improved reliability due to redu
Download
Optimizing Digital Motor Control Libraries
PDF, 365 Kb, File published: Mar 15, 2007
The DMC library contains a collection of component modules and system implementations, which are intended for evaluation, accelerated design, and development of motor control firmware.The software is intended to meet these goals, and no optimization is performed.As system designers implement systems, they must optimize their systems for performance in terms of memory consumption and CPU cyc
Download
Migrating Code Composer v4.12 Projects to Code Composer Studio v2.0
PDF, 117 Kb, File published: Jul 11, 2002
This application report describes the process of migrating an existing Code Composer v4.12 project to a Code Composer Studio? Integrated Development Environment (IDE) v2 project.
Download
TMS320x281x to TMS320x280x/2801x/2804x Migration Overview (Rev. A)
PDF, 124 Kb, Revision: A, File published: Oct 5, 2006
This application report describes differences between the Texas Instruments TMS320x281x and TMS320x280x/2801x/2804x DSPs to assist in application migration from the 281x to the 280x. While the main focus of this document is migration from 281x to 280x/2801x/2804x, users considering migrating in the reverse direction (280x to 281x) will also find this document useful. Functions that are identical
Download
Recommended Power Solutions for the TMS320x2810/1/2 DSPs
PDF, 28 Kb, File published: Jan 31, 2005
This application report provides a table to assist users in selecting the best power solution for their specific TMS320281x application.
Download
Interfacing SD/MMC Cards With TMS320F28xxx DSCs
PDF, 1.3 Mb, File published: Jul 26, 2007
This application report and associated code implements the interfacing of Secure Digital (SD) or Multi-Media Card (MMC) types of Flash memory cards with the TMS320F28xxx digital signal controllers (DSCs). These cards can use serial peripheral interface (SPI) or parallel (SD) interface to connect to the host. This application report demonstrates the SPI mode and includes the schematics showing th
Download
Custom Bootloader Options via One-Time Programmable (OTP) Memory
PDF, 62 Kb, File published: Sep 18, 2007
The Boot to One-Time-Programmable (OTP) memory mode in the TMS320x280x devices provides the necessary hooks to support custom bootloaders. This is very useful in a situation where a bootloader option, required by a specific customer application, is not already supported as one of the built-in options in the Boot read-only memory (ROM). This application report includes information and examples on h
Download
An Easy Way of Creating a C-callable Assembly Function for the TMS320C28x DSP
PDF, 185 Kb, File published: Oct 30, 2001
C-callable assembly routines require an understanding of parameter-passing conventions and environments expected by the C compiler. This application report provides instructions and suggestions to configure the C compiler to assist with these issues.
Download
An Overview of Designing Analog Interface With TM320F28xx/28xxx DSCs (Rev. A)
PDF, 655 Kb, Revision: A, File published: May 14, 2008
This application report provides guidelines that take you through everything from configuring the ADC and related registers correctly, responding to interrupts, and board design recommendations; this may be particularly useful for first-time users of the TMS320C2000в„ў digital signal processor (DSP) platform devices and for firmware engineers with less exposure to the analog world. Various s
Download
Online Stack Overflow Detection on the TMS320C28x DSP
PDF, 407 Kb, File published: May 2, 2003
A stack overflow in an embedded DSP application generally produces a catastrophic software crash due to data corruption, lost return addresses, or both. Traditional off-line approaches to sizing a stack during development, such as filling with a know value, or estimating based on code content, are not 100% reliable. Therefore, programmers often feel compelled to reserve larger stack sizes than are
Download
Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. D)
PDF, 530 Kb, Revision: D, File published: Feb 27, 2013
This application report explores a hardware abstraction layer implementation to make C/C++ coding easier on C28x devices. This method is compared to traditional #define macros and topics of code efficiency and special case registers are also addressed.
Download
Flash Programming Solutions for the TMS320F28xxx DSCs
PDF, 423 Kb, File published: Aug 19, 2008
Flash programming is a process that occurs during all stages of a TMS320F28xxx digital signal controller (DSC) development cycle: firmware debug, prototyping, production, and field reprogramming. Several solutions are available to accommodate programming for all of these development stages. This application report presents solutions that are available and at what stage in the development cycle the
Download
Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices
PDF, 2.0 Mb, File published: Nov 16, 2009
The C28xxx generation of microcontrollers can connect to external nonvolatile memory through a variety of interfaces including parallel, serial peripheral interface (SPI), and inter-integrated circuit (I2C). This application report discusses how to write drivers for your external nonvolatile memory to allow for in-place programming using SDFlash, an application provided by Spectrum Digital, Inc. A
Download
Common Object File Format (COFF)
PDF, 125 Kb, File published: Apr 15, 2009

Model Line

Series: TMS320R2812 (7)

TMS320R2812GHHA TMS320R2812GHHS TMS320R2812PGFA TMS320R2812PGFQ TMS320R2812PGFS TMS320R2812ZHHA TMS320R2812ZHHS

Manufacturer's Classification

Semiconductors > Microcontrollers (MCU) > Performance MCUs > Real-time Control > Fixed-point F280x/1x