Datasheet Texas Instruments LMH6624MFX/NOPB

Manufacturer	Texas Instruments
Series	LMH6624
Part Number	LMH6624MFX/NOPB

Single/ Dual Ultra Low Noise Wideband Operational Amplifier 5-SOT-23 -40 to 125

Datasheets

Download

PDF, 1.9 Mb, Revision: G, File published: Dec 19, 2014

Extract from the document

Prices

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Packaging

Pin	5
Package Type	DBV
Industry STD Term	SOT-23
JEDEC Code	R-PDSO-G
Package QTY	3000
Carrier	LARGE T&R
Device Marking	A94A
Width (mm)	1.6
Length (mm)	2.9
Thickness (mm)	1.2
Pitch (mm)	.95
Max Height (mm)	1.45
Mechanical Data	Download

Parametrics

Additional Features	Decompensated
Architecture	Bipolar
CMRR(Min)	87 dB
CMRR(Typ)	95 dB
GBW(Typ)	1800 MHz
Input Bias Current(Max)	20000000 pA
Iq per channel(Max)	16 mA
Iq per channel(Typ)	12 mA
Number of Channels	1
Offset Drift(Typ)	0.25 uV/C
Operating Temperature Range	-40 to 125 C
Output Current(Typ)	100 mA
Package Group	SOT-23
Package Size: mm2:W x L	5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG
Rail-to-Rail	No
Rating	Catalog
Slew Rate(Typ)	400 V/us
Total Supply Voltage(Max)	12 +5V=5, +/-5V=10
Total Supply Voltage(Min)	5 +5V=5, +/-5V=10
Vn at 1kHz(Typ)	0.92 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)	0.5 mV

Eco Plan

RoHS

Compliant

Design Kits & Evaluation Modules

Evaluation Modules & Boards: LMH730227
Evaluation Board for High-Speed Single Op Amp in the 8-Pin SOIC Package
Lifecycle Status: Active (Recommended for new designs)
- Download
Evaluation Modules & Boards: LMH730216
Evaluation Board for High-Speed Single Op Amp in the 5- 6-Pin SOT-23 Package
Lifecycle Status: Active (Recommended for new designs)
- Download
Evaluation Modules & Boards: LMH730316
LMH730316 Evaluation Board for High-Speed Single Op Amp in the 5-/6-Pin SOT-23 Package
Lifecycle Status: Active (Recommended for new designs)
- Download

Application Notes

Download
AN-1604 Decompensated Operational Amplifiers (Rev. B)
PDF, 206 Kb, Revision: B, File published: May 1, 2013
This application report discusses the what, why, and where of decompensated op amps. This applicationreport also describes external compensation techniques, such as reducing loop gain, to stabilize op ampsoperated at gains less than the minimum stable gain specified in the datasheet. A comprehensivetreatment of input lead-lag compensation including examples is presented.
Download
OA-14 Improving Amplifier Noise for High 3rd Intercept Amplifiers (Rev. F)
PDF, 594 Kb, Revision: F, File published: May 1, 2013
This application report discusses improving Amplifier Noise for High 3rd Intercept Amplifiers.
Download
Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A)
PDF, 153 Kb, Revision: A, File published: May 16, 2017
This application note is intended as a guide for the designer looking to amplify the small signal from a photodiode or avalanche diode so that it would be large enough for further processing (e.g. data acquisition) or to trigger some other event in a system. The challenge in doing so, as always, is to not degrade the signal such that it becomes indistinguishable from random noi
Download
OA-15 Frequent Faux Pas in Applying Wideband Current Feedback Amplifiers (Rev. C)
PDF, 365 Kb, Revision: C, File published: Apr 17, 2013
As op amp operating speeds have moved to ever higher frequencies, a whole new set of design concernshave come into play for linear op amp applications. With the development of the current feedbacktopology, design concerns unique to that topology must also be considered if optimal performance is to beachieved from devices offering over 200 MHz в€’3 dB bandwidths. This application report reviews

Model Line

Series: LMH6624 (6)

LMH6624MA LMH6624MA/NOPB LMH6624MAX/NOPB LMH6624MF LMH6624MF/NOPB LMH6624MFX/NOPB

Manufacturer's Classification

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps