Datasheet Texas Instruments ADS6242

Manufacturer	Texas Instruments
Series	ADS6242

Datasheets

Prices

Status

Packaging

Parametrics

Parameters / Models	ADS6242IRGZT
# Input Channels	2
Analog Input BW, MHz	500
Architecture	Pipeline
DNL(Max), +/-LSB	2.5
DNL(Typ), +/-LSB	0.5
ENOB, Bits	12
INL(Max), +/-LSB	4.5
INL(Typ), +/-LSB	2
Input Buffer	No
Input Range, Vp-p	2
Interface	Serial LVDS
Operating Temperature Range, C	-40 to 85
Package Group	VQFN
Package Size: mm2:W x L, PKG	48VQFN: 49 mm2: 7 x 7(VQFN)
Power Consumption(Typ), mW	630
Rating	Catalog
Reference Mode	Ext,Int
Resolution, Bits	14
SFDR, dB	88
SINAD, dB	73.7
SNR, dB	74
Sample Rate(Max), MSPS	65

Eco Plan

Application Notes

• Download
  Band-Pass Filter Design Techniques for High-Speed ADCs
  PDF, 733 Kb, File published: Feb 27, 2012
  Several well-known methods exist for designing passive inductor-capacitor (LC) filters with resistive load terminations. However, when LC filters are used to drive the analog input pins of a high-speed analog-to-digital converter (ADC), special consideration must be given to the ADC input impedance. Not accounting for the ADC input impedance often results in a filter design that does not meet the
• Download
  QFN Layout Guidelines
  PDF, 1.3 Mb, File published: Jul 28, 2006
  Board layout and stencil information for most Texas Instruments Quad Flat No-Lead (QFN) devices is provided in their data sheets. This document helps printed-circuit board designers understand and better use this information for optimal designs.
• Download
  CDCE62005 as Clock Solution for High-Speed ADCs
  PDF, 805 Kb, File published: Sep 4, 2008
  TI has introduced a family of devices well-suited to meet the demands for high-speed ADC devices such as the ADS5527 which is capable of sampling up to 210 MSPS. To realize the full potential of these high-performance products it is imperative to provide a low phase noise clock source. The CDCE62005 clock synthesizer chip offers a real-world clocking solution to meet these stringent requirements
• Download
  Design Considerations for Avoiding Timing Errors during High-Speed ADC, LVDS Dat (Rev. A)
  PDF, 2.0 Mb, Revision: A, File published: May 22, 2015
• Download
  Why Use Oversampling when Undersampling Can Do the Job? (Rev. A)
  PDF, 1.2 Mb, Revision: A, File published: Jul 19, 2013
• Download
  Smart Selection of ADC/DAC Enables Better Design of Software-Defined Radio
  PDF, 376 Kb, File published: Apr 28, 2009
  This application report explains different aspects of selecting analog-to-digital and digital-to-analog data converters for Software-Defined Radio (SDR) applications. It also explains how ADS61xx ADCs and the DAC5688 from Texas Instruments fit properly for SDR designs.
• Download
  Driving High-Speed ADCs: Circuit Topologies and System-Level Parameters (Rev. A)
  PDF, 327 Kb, Revision: A, File published: Sep 10, 2010
  This application report discusses the performance-related aspects of passive and active interfaces at the analog input of high-speed pipeline analog-to-digital converters (ADCs). The report simplifies the many possibilities into two main categories: passive and active interface circuits. The first section of the report gives an overview of equivalent models of buffered and unbuffered ADC input cir
• Download
  Phase Noise Performance and Jitter Cleaning Ability of CDCE72010
  PDF, 2.3 Mb, File published: Jun 2, 2008
  This application report presents phase noise data taken on the CDCE72010 jitter cleaner and synchronizer PLL device. The phase noise performance of the CDCE72010 depends on the phase noise of the reference clock VCXO clock and the CDCE72010 itself. This application report shows the phase noise performance at several of the most popular CDMA frequencies. This data helps the user to choose the rig
• Download
  CDCE72010 as a Clocking Solution for High-Speed Analog-to-Digital Converters
  PDF, 424 Kb, File published: Jun 8, 2008
  Texas Instruments has recently introduced a family of devices suitable to meet the demands of high-speed high-IF sampling analog-to-digital converters (ADCs) such as the ADS5483 which is capable of sampling up to 135 MSPS. To realize the full potential of these high-performance devices the system must provide an extremely low phase noise clock source. The CDCE72010 clock synthesizer chip offers
• Download
  QFN and SON PCB Attachment (Rev. B)
  PDF, 821 Kb, Revision: B, File published: Aug 24, 2018
• Download
  Principles of Data Acquisition and Conversion (Rev. A)
  PDF, 132 Kb, Revision: A, File published: Apr 16, 2015
• Download
  A Glossary of Analog-to-Digital Specifications and Performance Characteristics (Rev. B)
  PDF, 425 Kb, Revision: B, File published: Oct 9, 2011
  This glossary is a collection of the definitions of Texas Instruments' Delta-Sigma (О”ОЈ), successive approximation register (SAR), and pipeline analog-to-digital (A/D) converter specifications and performance characteristics. Although there is a considerable amount of detail in this document, the product data sheet for a particular product specification is the best and final reference.
• Download
  Analog-to-Digital Converter Grounding Practices Affect System Performance (Rev. A)
  PDF, 69 Kb, Revision: A, File published: May 18, 2015

Model Line

Manufacturer's Classification

• Semiconductors> Data Converters> Analog-to-Digital Converters (ADCs)> High Speed ADCs (>10MSPS)