Datasheet Texas Instruments CC1100ERGPT
| Manufacturer | Texas Instruments |
| Series | CC1100E |
| Part Number | CC1100ERGPT |
Low-Power Sub-1GHz RF Transceiver for China and Japan frequency bands 20-QFN -40 to 85
Datasheets
Low-Power Sub-GHz RF Transceiver (470-510 MHz and 950-960 MHz) datasheet
PDF, 1.7 Mb, File published: Apr 2, 2009
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 20 |
| Package Type | RGP |
| Industry STD Term | VQFN |
| JEDEC Code | S-PQFP-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | CC1100E |
| Width (mm) | 4 |
| Length (mm) | 4 |
| Thickness (mm) | .93 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | Download |
Parametrics
| Data Rate(Max) | 500 kbps |
| Device Type | Smart RF Transceiver |
| Frequency Bands | 470 MHz |
| Operating Temperature Range | -40 to 85 C |
| RX Current (Lowest) | 15 mA |
| Rating | Catalog |
| Sensitivity (Best) | -112 dBm |
| Special Features | N/A |
| TX Power(Max) | 12 dBm |
| Technology | Sub-1 GHz |
| Throughput(Max) | 0.6 Mbps |
Eco Plan
| RoHS | Compliant |
Application Notes
- AN119 – Using CC1190 Front End with CC1100E in the 470-510 MHz BandPDF, 367 Kb, File published: Oct 9, 2012
- DN010 -- Close-in Reception with CC1101 (Rev. B)PDF, 102 Kb, Revision: B, File published: Jul 21, 2009
- TI LPRF EASYMODEPDF, 57 Kb, File published: Dec 12, 2014
This application report describes the frame format and physical layer (PHY) parameters for TI LPRF EasyMode (EasyMode50K), which provides unified, simple, and well defined PHY modes supported by all sub-1 GHz radio devices from LPRF. - AN047 -- CC1100/CC2500 Wake on Radio (Rev. B)PDF, 220 Kb, Revision: B, File published: Mar 23, 2009
AN047--CC1100/CC2500 Wake on Radio - AN085 -- Implementing Diversity Using Low Power RadiosPDF, 459 Kb, File published: Jan 26, 2010
CC1101, CC1110, CC2500, CC2510, CC430 Implementing 'Diversity' Using Low Power Radios - DN509 -- Data Whitening and Random TX ModePDF, 183 Kb, File published: Apr 12, 2010
This document gives an overview of the data whitening and random data transmission circuitry in the CC430, CC1100, CC1100E, CC1101, CC1110, CC1111, CC1150, CC2500, CC2510, CC2511, and CC2550 devices. - DN400 -- Interfacing CC1100 - CC2500 with MSP430 (Rev. A)PDF, 292 Kb, Revision: A, File published: Mar 24, 2009
- AN095 -- Continuous Data Streaming Applications - Using Serial Synchronous Mode (Rev. A)PDF, 381 Kb, Revision: A, File published: Jul 18, 2011
- DN503 -- SPI Access (Rev. B)PDF, 94 Kb, Revision: B, File published: Oct 22, 2007
The purpose of this design note is to show how the serial peripheral interface (SPI) must be configured to be able to communicate with the CC1100/CC1101/CC1150/CC2500/CC2550. It also shows how the status bytes should be interpreted and how SW reset is done over the SPI interface. - DN501 -- PATABLE Access (Rev. B)PDF, 66 Kb, Revision: B, File published: Mar 24, 2009
- DN500 -- Packet Transmission Basics (Rev. C)PDF, 174 Kb, Revision: C, File published: Apr 6, 2009
- DN505 -- RSSI interpretation and timing (Rev. D)PDF, 129 Kb, Revision: D, File published: Jun 16, 2010
- DN111 - Current Consumption for a Polling Receiver (Rev. A)PDF, 687 Kb, Revision: A, File published: Mar 24, 2009
- DN506 -- GDO Pin Usage (Rev. A)PDF, 219 Kb, Revision: A, File published: Oct 22, 2007
The purpose of this design note is to explain how to use the different general digital output (GDO) pins for control and monitoring purposes. The focus is set on interfacing with a microcontroller unit (MCU) and is related to the CC1100, CC1101, CC1150, CC2500 and CC2550 devices. - DN508 -- Frequency Scanning using CC430Fx, CC110x, and CC111xFxPDF, 65 Kb, File published: Jan 25, 2010
The purpose of this design note is to show the necessary steps to successfully scan through a frequency band covering n numbers of channels, and find the strongest signal in the band. - DN300 -- SmartRF04EB Troubleshooting (Rev. B)PDF, 490 Kb, Revision: B, File published: Mar 24, 2009
- DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E)PDF, 532 Kb, Revision: E, File published: Mar 8, 2012
- DN005 -- CC11xx Sensitivity versus Frequency Offset and Crystal Accuracy (Rev. C)PDF, 96 Kb, Revision: C, File published: Aug 20, 2009
- DN504 -- FEC Implementation (Rev. A)PDF, 110 Kb, Revision: A, File published: Oct 22, 2007
This design note explains the functionality of forward error correction (FEC) and how it is used in the CC1100, CC1101, CC1110, CC1111, CC1150, CC2500, CC2510, CC2511, and CC2550 devices. Example code for FEC implementation is included. - DN032 -- Options for Cost Optimized CC11xx MatchingPDF, 112 Kb, File published: Aug 25, 2010
- DN019 -- Powering Low-Power RF Products (Rev. B)PDF, 327 Kb, Revision: B, File published: Sep 18, 2009
- DN507 -- FEC DecodingPDF, 264 Kb, File published: Jan 28, 2010
The purpose of this design note is to show how the FEC decoding implemented in HW on the CC1100, CC1100E, CC1101, CC1110Fx, CC1111Fx, CC1150, CC2500, CC2510Fx, CC2511Fx, and CC2550 can be implemented in SW. This is in particular very important for the CC430Fx device, which has the same radio as the CC1101 and CC1110/11Fx but without HW FEC included. - AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A)PDF, 456 Kb, Revision: A, File published: Aug 2, 2012
- DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E)PDF, 1.0 Mb, Revision: E, File published: Feb 22, 2013
- DN502 -- CRC Implementation (Rev. D)PDF, 55 Kb, Revision: D, File published: Oct 27, 2009
- DN303 -- Cleanup of Installed PC ToolsPDF, 545 Kb, File published: Dec 20, 2006
- DN033 - Mitsubishi Ceramic Antenna for 868 MHz, 915 MHz & 955 (Rev. A)PDF, 685 Kb, Revision: A, File published: Sep 14, 2010
- DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C)PDF, 369 Kb, Revision: C, File published: Aug 30, 2011
- AN014 -- Frequency Hopping SystemsPDF, 210 Kb, File published: Feb 1, 2006
- DN011 -- RF Module Testing using SmartRF Studio (Rev. A)PDF, 325 Kb, Revision: A, File published: Mar 23, 2009
- AN021 -- Voltage Level ConversionPDF, 212 Kb, File published: Feb 1, 2006
- DN018 -- Range Measurements in an Open Field Environment (Rev. A)PDF, 607 Kb, Revision: A, File published: Apr 15, 2008
This design note is a general description of how to set up open field range measurements and what has to be considered. Applies to all low power RF-ICs. - DN002 -- Practical Sensitivity TestingPDF, 364 Kb, File published: Dec 20, 2006
- AN003 -- SRD AntennasPDF, 358 Kb, File published: Feb 1, 2006
- DN000 - Design Note Overview (Rev. T)PDF, 126 Kb, Revision: T, File published: Oct 12, 2011
- DN031 -- CC-Antenna-DK Documentation and Antenna Measurements SummaryPDF, 2.3 Mb, File published: Aug 26, 2010
DN031 -- Design Notes - AN058 -- Antenna Selection Guide (Rev. B)PDF, 1.8 Mb, Revision: B, File published: Oct 6, 2010
- DN035 -- Antenna Quick Guide (Rev. A)PDF, 138 Kb, Revision: A, File published: Feb 12, 2013
Model Line
Series: CC1100E (2)
- CC1100ERGPR CC1100ERGPT
Manufacturer's Classification
- Semiconductors > Wireless Connectivity > Companion Wireless Solutions > Smart RF Transceivers
