Datasheet Texas Instruments CC2640R2F-Q1

Manufacturer	Texas Instruments
Series	CC2640R2F-Q1

Datasheets

Prices

Status

Packaging

Parametrics

Parameters / Models	CC2640R2FTWRGZRQ1	CC2640R2FTWRGZTQ1	XCC2640R2FTWRGZTQ1
ADC Resolution, Bits	12	12
ADC Resolution(Bits)			12
CPU	ARM Cortex-M3	ARM Cortex-M3	ARM Cortex-M3
Device Type	Wireless MCU	Wireless MCU	Wireless MCU
Flash, KB	128	128
Flash (KB)			128
GPIO	31	31	31
Operating Temperature Range, C	-40 to 105	-40 to 105
Operating Temperature Range(C)			-40 to 105
Package Group	VQFN	VQFN	VQFN
RAM, KB	20	20
RAM(KB)			20
Security Enabler	Cryptographic acceleration,Debug security,Device identity	Cryptographic acceleration,Debug security,Device identity	Cryptographic Acceleration Debug Security Device Identity Software IP Protection
Standby Current, uA	1.1	1.1
Standby Current(uA)			1.1
Technology	Bluetooth low energy (BLE),Proprietary	Bluetooth low energy (BLE),Proprietary	Bluetooth low energy (BLE) Proprietary

Eco Plan

Application Notes

• Download
  Increase RAM Size on the CC2640R2F Bluetooth low energy Wireless MCU
  PDF, 130 Kb, File published: Mar 23, 2017
  This application report documents ways to increase the available random access memory (RAM) for your application on the CC2640R2F SimpleLinkв„ў Bluetooth low energy microcontroller. By moving initialized data or compiled code from the SRAM into other parts of the memory, the available SRAM is increased. This application report also highlights some of the tools found in the SimpleLink CC2640R2
• Download
  Hardware Migration From CC2640F128 to CC2640R2F
  PDF, 27 Kb, File published: Jan 31, 2017
  This application report describes the required changes when moving from the SimpleLinkв„ў CC2640F128 to the SimpleLink CC2640R2F wireless MCU.
• Download
  Measuring Bluetooth Low Energy Power Consumption (Rev. C)
  PDF, 5.0 Mb, Revision: C, File published: Jan 10, 2017
  This application report describes the setup and procedures to measure power consumption on CC2650,CC2640 and CC2640R2F devices operating as a Bluetooth® low energy “Peripheral” device.
• Download
  Running BluetoothВ® Low Energy on CC2640 Without 32 kHz Crystal (Rev. B)
  PDF, 82 Kb, Revision: B, File published: Apr 5, 2017
  This application report explains how you can configure the SimpleLinkв„ў Bluetooth low energy CC2640 wireless MCU, CC2640R2F wireless MCU and multi-standard CC2650 wireless MCU to run the Bluetooth low energy (BLE) software stack without the need for a 32 kHz crystal.
• Download
  Using the Wireless SimpleLink CC26xx in Ext Regulator Mode With the TPS62740
  PDF, 301 Kb, File published: Nov 19, 2015
  This application report describes the set-up and expected performance when using the CC2640 in external regulator mode together with the TPS62740. Although this application report focuses on the CC2640 and BluetoothВ® Smart applications, the solutions provided are also applicable for the entire CC26xx family and its supported protocols. Note that waveforms and power consumption measurement r
• Download
  Using GCC/GDB With SimpleLink CC26xx
  PDF, 1.0 Mb, File published: Feb 23, 2015
  This application report describes how to set up an open source software-based development environment for the SimpleLink CC26xx and CC13xx wireless MCUs using Eclipse as integrated development environment (IDE).
• Download
  CC2640 Wireless MCU DC Supply Evaluation
  PDF, 1.3 Mb, File published: Oct 5, 2015
  CC2640 Wireless MCU DC Supply Evaluation /WTBU/WCS/Bluetooth/AppReports/SWRA494/SWRA494
• Download
  Crystal Oscillator and Crystal Selection for the CC26xx and CC13xx Wireless MCUs (Rev. F)
  PDF, 886 Kb, Revision: F, File published: Aug 10, 2017
• Download
  ETSI EN 300 328 Blocking Test for Bluetooth Low Energy
  PDF, 2.4 Mb, File published: Feb 8, 2017
  This application report describes the setup and procedure used to measure the new ETSI EN receiver (RX) blocking test added to version v2.1.1 of the ETSI EN 300 328 harmonized standard.
• Download
  CC2538/CC26xx Bootloader Interface (Rev. A)
  PDF, 277 Kb, Revision: A, File published: May 21, 2015
  This application report provides a brief overview on the serial bootloader that resides in ROM on the CC2538 and CC13xx/CC26xx devices. This document shows how the bootloader protocol can be used to perform basic operations like erasing and programming the flash of the devices. The device bootloaders support universal asynchronous receiver/transmitter (UART) and serial peripheral interface (SPI) a
• Download
  CC-Antenna-DK2 and Antenna Measurements Summary
  PDF, 14.8 Mb, File published: Mar 3, 2016
  The purpose of the antenna development kit (CC-Antenna-DK2) is to ease the decision of which type of low-cost antenna can be implemented as well as give an estimation of the performance that can be achieved.

Model Line

Manufacturer's Classification

• Semiconductors> Microcontrollers (MCU)> SimpleLink MCUs> SimpleLink wireless MCUs> SimpleLink CC264x BLE