Datasheet Texas Instruments LM137

ManufacturerTexas Instruments
SeriesLM137
Datasheet Texas Instruments LM137

Extended Temperature 1.5A Adjustable Output Negative Voltage Regulator / LDO

Datasheets

LM137, LM337-N 3-Terminal Adjustable Negative Regulators datasheet
PDF, 3.0 Mb, Revision: E, File published: Jan 13, 2016
Extract from the document

Prices

Status

LM137HLM137H/NOPB
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoNo

Packaging

LM137HLM137H/NOPB
N12
Pin33
Package TypeNDTNDT
Industry STD TermTO-CANTO-CAN
JEDEC CodeO-MSFM-PO-MSFM-P
Package QTY500500
Device MarkingLM137HP+LM137HP+
Width (mm)8.2558.255
Length (mm)8.2558.255
Thickness (mm)4.4454.445
Pitch (mm)4.6994.699
Mechanical DataDownloadDownload

Parametrics

Parameters / ModelsLM137H
LM137H
LM137H/NOPB
LM137H/NOPB
Accuracy, %44
Iout(Max), A1.51.5
Iq(Typ), mA0.0650.065
Noise, uVrms11101110
Operating Temperature Range, C-55 to 150-55 to 150
Output Capacitor TypeNon-CeramicNon-Ceramic
Output OptionsAdjustable Output,Negative OutputAdjustable Output,Negative Output
PSRR @ 100KHz, dB3030
Package GroupTOTO
Package Size: mm2:W x L, PKG3TO: 92 mm2: 9.14 x 10.03(TO)3TO: 92 mm2: 9.14 x 10.03(TO)
RatingCatalogCatalog
Regulated Outputs11
Special FeaturesN/AN/A
Thermal Resistance ОёJA, В°C/W137137
Vdo(Typ), mV30003000
Vin(Max), V-4.2-4.2
Vin(Min), V-40-40
Vout(Max), V-1.2-1.2
Vout(Min), V-37-37

Eco Plan

LM137HLM137H/NOPB
RoHSCompliantCompliant

Application Notes

  • A Topical Index of TI LDO Application Notes (Rev. F)
    PDF, 82 Kb, Revision: F, File published: Jun 27, 2019
  • Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)
    PDF, 509 Kb, Revision: A, File published: Jun 4, 2008
  • Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A)
    PDF, 284 Kb, Revision: A, File published: May 5, 2013
    When working with voltage regulator circuits the designer is often confronted with the need to calculatethe tolerance of the regulated output voltage. For fixed voltage regulators this problem is easily managedbecause the required information is directly supplied on the semiconductor manufacturer's data sheet.
  • AN-182 Improving Power Supply Reliability with IC Power Regulators (Rev. B)
    PDF, 82 Kb, Revision: B, File published: May 5, 2013
    This application report discusses improving power supply reliability with IC power regulators.
  • AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B)
    PDF, 300 Kb, Revision: B, File published: May 6, 2013
    This application note discusses the operation and compensation of linear regulators.
  • AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)
    PDF, 814 Kb, Revision: A, File published: May 6, 2013
    The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t
  • Understanding the Terms and Definitions of LDO Voltage Regulators
    PDF, 197 Kb, File published: Oct 21, 1999
    This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab
  • A New Production Technique for Trimming Voltage Regulators
    PDF, 105 Kb, File published: Oct 3, 2002
  • Packaging Limits Range of Linear Regulators
    PDF, 75 Kb, File published: May 8, 2010
    The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.

Model Line

Series: LM137 (2)

Manufacturer's Classification

  • Semiconductors> Power Management> Linear Regulator (LDO)> Single Channel LDO