Datasheet Texas Instruments LM392-N
| Manufacturer | Texas Instruments |
| Series | LM392-N |
Low Power Operational Amplifier/Voltage Comparator
Datasheets
LM392 Low Power Operational Amplifier/Voltage Comparator datasheet
PDF, 860 Kb, Revision: D, File published: Mar 21, 2013
Extract from the document
Prices
Status
| LM392M | LM392M/NOPB | LM392MX/NOPB | LM392N/NOPB | |
|---|---|---|---|---|
| Lifecycle Status | NRND (Not recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | Yes | Yes | Yes |
Packaging
| LM392M | LM392M/NOPB | LM392MX/NOPB | LM392N/NOPB | |
|---|---|---|---|---|
| N | 1 | 2 | 3 | 4 |
| Pin | 8 | 8 | 8 | 8 |
| Package Type | D | D | D | P |
| Industry STD Term | SOIC | SOIC | SOIC | PDIP |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G | R-PDIP-T |
| Package QTY | 95 | 95 | 2500 | 40 |
| Carrier | TUBE | TUBE | LARGE T&R | TUBE |
| Device Marking | M | M | M | LM |
| Width (mm) | 3.91 | 3.91 | 3.91 | 6.35 |
| Length (mm) | 4.9 | 4.9 | 4.9 | 9.81 |
| Thickness (mm) | 1.58 | 1.58 | 1.58 | 3.9 |
| Pitch (mm) | 1.27 | 1.27 | 1.27 | 2.54 |
| Max Height (mm) | 1.75 | 1.75 | 1.75 | 5.08 |
| Mechanical Data | Download | Download | Download | Download |
Parametrics
| Parameters / Models | LM392M | LM392M/NOPB | LM392MX/NOPB | LM392N/NOPB |
|---|---|---|---|---|
| Input Bias Current (+/-)(Max), nA | 250 | 250 | 250 | 250 |
| Iq per channel(Max), mA | 1 | 1 | 1 | 1 |
| Number of Channels | 2 | 2 | 2 | 2 |
| Operating Temperature Range, C | 0 to 70 | 0 to 70 | 0 to 70 | 0 to 70 |
| Output Type | Open Collector | Open Collector | Open Collector | Open Collector |
| Package Group | SOIC | SOIC | SOIC | PDIP |
| Package Size: mm2:W x L, PKG | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | See datasheet (PDIP) |
| Propagation Delay Time, uS | 1.5 | 1.5 | 1.5 | 1.5 |
| Rail-to-Rail | Out | Out | Out | Out |
| Rating | Catalog | Catalog | Catalog | Catalog |
| Special Features | With Op Amp | With Op Amp | With Op Amp | With Op Amp |
| VICR(Max), V | 30 | 30 | 30 | 30 |
| Vos (Offset Voltage @ 25C)(Max), mV | 5 | 5 | 5 | 5 |
| Vs(Max), V | 32 | 32 | 32 | 32 |
| Vs(Min), V | 3 | 3 | 3 | 3 |
Eco Plan
| LM392M | LM392M/NOPB | LM392MX/NOPB | LM392N/NOPB | |
|---|---|---|---|---|
| RoHS | See ti.com | Compliant | Compliant | Compliant |
Application Notes
- AN-286 Applications of the LM392 Comparator Op Amp IC (Rev. B)PDF, 462 Kb, Revision: B, File published: Apr 26, 2013
This application note discusses the uses of the LM339 quad comparator and the LM324 op amp areamong the most widely used linear ICs today. The combination of low cost, single or dual supply operationand ease of use has contributed to the wide range of applications for these devices. - CMOS ADC Interfaces Easily with many Microprocessors (Rev. B)PDF, 183 Kb, Revision: B, File published: Apr 30, 2013
To help meet the rising demand for easier interfacing between analog-to-digital converters and microprocessors, the complementary MOS, 8-bit ADC0801-05 has been designed to accommodate almost all of today's popular microprocessors. It requires only a single 5 V supply and is low power to boot. With a span accommodation down to 180 mV, this 8-bit unit can also replace a 12-bit analog-to-digital dev
Model Line
Series: LM392-N (4)
Manufacturer's Classification
- Semiconductors> Amplifiers> Comparators
