Datasheet Texas Instruments LM5007
| Manufacturer | Texas Instruments |
| Series | LM5007 |
9-75V Wide Vin, 500mA Constant On-Time Non-Synchronous Buck Regulator
Datasheets
LM5007 High Voltage 80-V Step Down Switching Regulator datasheet
PDF, 1.1 Mb, Revision: G, File published: Nov 30, 2015
Extract from the document
Prices
Status
| LM5007MM | LM5007MM/NOPB | LM5007MMX/NOPB | LM5007SD | LM5007SD/NOPB | LM5007SDX/NOPB | |
|---|---|---|---|---|---|---|
| Lifecycle Status | NRND (Not recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) | NRND (Not recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | Yes | No | No | Yes | Yes |
Packaging
| LM5007MM | LM5007MM/NOPB | LM5007MMX/NOPB | LM5007SD | LM5007SD/NOPB | LM5007SDX/NOPB | |
|---|---|---|---|---|---|---|
| N | 1 | 2 | 3 | 4 | 5 | 6 |
| Pin | 8 | 8 | 8 | 8 | 8 | 8 |
| Package Type | DGK | DGK | DGK | NGT | NGT | NGT |
| Industry STD Term | VSSOP | VSSOP | VSSOP | WSON | WSON | WSON |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G | S-PDSO-N | S-PDSO-N | S-PDSO-N |
| Package QTY | 1000 | 1000 | 3500 | 1000 | 1000 | 4500 |
| Carrier | SMALL T&R | SMALL T&R | LARGE T&R | SMALL T&R | SMALL T&R | LARGE T&R |
| Device Marking | S81B | S81B | S81B | L00031B | L00031B | L00031B |
| Width (mm) | 3 | 3 | 3 | 4 | 4 | 4 |
| Length (mm) | 3 | 3 | 3 | 4 | 4 | 4 |
| Thickness (mm) | .97 | .97 | .97 | .8 | .8 | .8 |
| Pitch (mm) | .65 | .65 | .65 | .8 | .8 | .8 |
| Max Height (mm) | 1.07 | 1.07 | 1.07 | .8 | .8 | .8 |
| Mechanical Data | Download | Download | Download | Download | Download | Download |
Parametrics
| Parameters / Models | LM5007MM | LM5007MM/NOPB | LM5007MMX/NOPB | LM5007SD | LM5007SD/NOPB | LM5007SDX/NOPB |
|---|---|---|---|---|---|---|
| Control Mode | Constant on-time (COT) | Constant on-time (COT) | Constant on-time (COT) | Constant on-time (COT) | Constant on-time (COT) | Constant on-time (COT) |
| Duty Cycle(Max), % | 99 | 99 | 99 | 99 | 99 | 99 |
| Iout(Max), A | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| Iq(Typ), mA | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| Operating Temperature Range, C | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 |
| Package Group | VSSOP | VSSOP | VSSOP | WSON | WSON | WSON |
| Rating | Catalog | Catalog | Catalog | Catalog | Catalog | Catalog |
| Regulated Outputs | 1 | 1 | 1 | 1 | 1 | 1 |
| Special Features | Enable | Enable | Enable | Enable | Enable | Enable |
| Switching Frequency(Max), kHz | 800 | 800 | 800 | 800 | 800 | 800 |
| Switching Frequency(Min), kHz | 50 | 50 | 50 | 50 | 50 | 50 |
| Type | Converter | Converter | Converter | Converter | Converter | Converter |
| Vin(Max), V | 75 | 75 | 75 | 75 | 75 | 75 |
| Vin(Min), V | 9 | 9 | 9 | 9 | 9 | 9 |
| Vout(Max), V | 73 | 73 | 73 | 73 | 73 | 73 |
| Vout(Min), V | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
Eco Plan
| LM5007MM | LM5007MM/NOPB | LM5007MMX/NOPB | LM5007SD | LM5007SD/NOPB | LM5007SDX/NOPB | |
|---|---|---|---|---|---|---|
| RoHS | See ti.com | Compliant | Compliant | See ti.com | Compliant | Compliant |
Application Notes
- Starting Up A Buck Regulator With a Voltage Present At V OUT (Rev. A)PDF, 31 Kb, Revision: A, File published: Apr 30, 2013
This application report describes a buck regulator’s inability to startup when there is a voltage alreadypresent at the regulator’s output (VOUT). Although the LM5007 is used in this application report, the samediscussion applies to the LM50xx and LM349xx series of buck regulators. - Analysis & Design of Hysteretic Constant Freq Buck Regr Using the LM5007 (Rev. B)PDF, 403 Kb, Revision: B, File published: Apr 30, 2013
This application report describes the operation of the LM5007, and provides a step-by-step procedure forselecting the external components. - Controlling Output Ripple & Achiev ESR Indep Constant On-Time Reg Designs (Rev. A)PDF, 178 Kb, Revision: A, File published: Apr 23, 2013
Of all the voltage regulator control strategies ever devised, the hysteretic regulator is probably about thesimplest. This control methodology simply turns a switch on when the output voltage is below a referenceand turns the switch off when the output rises to a slightly higher reference. The output ripple is thereforea direct function of the difference between the upper and lower reference
Model Line
Series: LM5007 (6)
Manufacturer's Classification
- Semiconductors> Power Management> Non-isolated DC/DC Switching Regulator> Step-Down (Buck)> Buck Converter (Integrated Switch)
