Datasheet Texas Instruments PTH08000WAH

Manufacturer	Texas Instruments
Series	PTH08000W
Part Number	PTH08000WAH

2.25-A, 5/12-V Input, Non-Isolated Wide Adjust Module w/ Auto-Track 6-Through-Hole Module -40 to 85

Datasheets

Download

PDF, 663 Kb, Revision: B, File published: Feb 5, 2008

Extract from the document

PTH08000W www.ti.com SLTS248B вЂ“ JUNE 2005 вЂ“ REVISED FEBRUARY 2008 2.25-A, WIDE INPUT, ADJUSTABLE SWITCHING REGULATOR
WITH AUTO-TRACKв„ў SEQUENCING FEATURES 1 Up to 2.25-A Output Current at 85В°C 4.5-V to 14-V Input Voltage Range Wide-Output Voltage Adjust
(0.9 V to 5.5 V) Efficiencies Up to 94% On/Off Inhibit Undervoltage Lockout (UVLO) Output Overcurrent Protection
(Nonlatching, Auto-Reset) Overtemperature Protection Ambient Temperature Range: вЂ“40В°C to 85В°C Surface-Mount Package
2 Safety Agency Approvals:
UL/CUL 60950, EN60950 APPLICATIONS Telecommunications, Instrumentation,
and General-Purpose Circuits DESCRIPTION
The PTH08000W is a highly integrated, low-cost switching regulator module that delivers up to 2.25 A of output
current. The PTH08000W sources output current at a much higher efficiency than a TO-220 linear regulator IC,
eliminating the need for a heatsink. The small size (0.75 inch Г— 0.5 inch) and flexible operation creates value for
a variety of applications.
The input voltage range of the PTH08000W is 4.5 V to 14 V, allowing operation from either a 5-V or 12-V input
bus. Using state-of-the-art switched-mode power-conversion technology, the PTH08000W can step down to
voltages as low as 0.9 V from a 5-V input bus, with less than 1 W of power dissipation. The output voltage can
be adjusted to any voltage over the range, 0.9 V to 5.5 V, using a single external resistor. This series includes
Auto-Trackв„ў sequencing. This feature simplifies the task of supply voltage sequencing in a power system by
enabling modules to track each other, or any external voltage, during power up and power down. Operating
features include an undervoltage lockout (UVLO), on/off inhibit, overcurrent protection, and overtemperature
protection. Target applications include telecommunications, test and measurement applications, and high-end
consumer products. This product is available in both through-hole and surface-mount package options, including
tape and reel. The PTH08000W is compatible with TI's roadmap for RoHS and lead-free compliance.
STANDARD APPLICATION
1 Track VO 6 2 …

Prices

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

Packaging

Pin	6
Package Type	EUS
Industry STD Term	Through-Hole Module
JEDEC Code	R-PDSS-T
Package QTY	56
Carrier	TIW TRAY
Width (mm)	12.57
Length (mm)	18.92
Thickness (mm)	8.25
Pitch (mm)	3.175
Max Height (mm)	8.5
Mechanical Data	Download

Parametrics

Iout(Max)	2.25 A
Operating Temperature Range	-40 to 85 C
Package Size: mm2:W x L	6Surface Mount Module: 271 mm2: 13.59 x 19.94(Surface Mount Module),6Through-Hole Module: 271 mm2: 13.59 x 19.94(Through-Hole Module) PKG
Package Type	Open-Frame
Regulated Outputs	1
Soft Start	Fixed
Special Features	Enable,Output Discharge,Tracking
Vin(Max)	14 V
Vin(Min)	4.5 V
Vout(Max)	5.5 V
Vout(Min)	0.9 V

Eco Plan

RoHS	Not Compliant

Application Notes

Download
Power Two Xilinx(TM) LX240 Virtex-6(TM) Devices
PDF, 63 Kb, File published: Apr 20, 2010
This reference design is intended to help designers wishing to use two of the new Virtex-6™ LX240 FPGA along with DDR memory and other optional circuitry in their designs. It provides nine rails of lower voltage with an input of 12 volts. The use of PTH T2 modules provides a high-performance solution for good transient response and tight regulation while conserving valuable board space.
Download
New power modules improve surface-mount manufacturability
PDF, 1.1 Mb, File published: Jul 14, 2005
Download
High-Temperatures Soldering Requirements for Plug-in Power, Surface-Mount Pdts (Rev. A)
PDF, 112 Kb, Revision: A, File published: Aug 13, 2009

Model Line

Series: PTH08000W (5)

PTH08000WAH PTH08000WAS PTH08000WAST PTH08000WAZ PTH08000WAZT

Manufacturer's Classification

Semiconductors > Power Management > Power Modules > Non-Isolated Module > Step-Down (Buck) Module