Datasheet Texas Instruments SN74LVC1G66-Q1

Manufacturer	Texas Instruments
Series	SN74LVC1G66-Q1

Datasheets

Prices

Status

Packaging

Parametrics

Parameters / Models	1P1G66QDBVRG4Q1	1P1G66QDBVRQ1	SN74LVC1G66QDCKRQ1
Approx. price, US$	.083 | 1ku	.083 | 1ku
Bandwidth, MHz	300	300	300
CON(Typ), pF	13	13
Configuration	1:1 SPST	1:1 SPST	1:1 SPST
ESD Charged Device Model, kV			1
ESD HBM, kV			2
Input/Ouput Voltage(Max), V			5.5
Input/Output Continuous Current(Max), mA			50
Input/Output OFF-state Capacitance(Typ), pF			6
Input/Output ON-state Capacitance(Typ), pF			13
Input/output continuous current(Max), mA	50	50
Number of Channels			1
Number of channels	1	1
OFF-state leakage current(Max), µA			1
ON-state leakage current(Max), µA	1	1	1
Operating Temperature Range, C			-40 to 125
Operating temperature range, C	-40 to 125	-40 to 125
Package Group	SC70|5,SOT-23|5	SC70|5,SOT-23|5	SC70
Package Size: mm2:W x L, PKG			5SC70: 4 mm2: 2.1 x 2(SC70)
Package size: mm2:W x L, PKG	5SC70: 4 mm2: 2.1 x 2 (SC70|5),5SOT-23: 5 mm2: 1.6 x 2.9 (SOT-23|5)	5SC70: 4 mm2: 2.1 x 2 (SC70|5),5SOT-23: 5 mm2: 1.6 x 2.9 (SOT-23|5)
Power supply voltage - single, V	1.8,2.5,3.3,5	1.8,2.5,3.3,5
Rating	Automotive	Automotive	Automotive
Ron(Max), Ohms	165	165	165
Ron(Typ), Ohms	7.5	7.5	7.5
Supply Current(Max), uA			500
Supply Current(Typ), uA			1
Supply Range, Max			5.5
Supply current(Max), uA	500	500
Supply current(Typ), uA	1	1
VIH(Min), V			vcc*.7
VIL(Max), V			vcc*.3
Vdd(Max), V			5.5
Vdd(Min), V			1.65
Vss(Max), V			N/A
Vss(Min), V			N/A

Eco Plan

Application Notes

• Download
  LVC Characterization Information
  PDF, 114 Kb, File published: Dec 1, 1996
  This document provides characterization information about low-voltage logic (LVL) that operates from a 3.3-V power supply. It addresses the issues of interfacing to 5-V logic ac performance power considerations input and output characteristics and signal integrity for this family of devices.
• Download
  Use of the CMOS Unbuffered Inverter in Oscillator Circuits
  PDF, 796 Kb, File published: Nov 6, 2003
  CMOS devices have a high input impedance high gain and high bandwidth. These characteristics are similar to ideal amplifier characteristics and hence a CMOS buffer or inverter can be used in an oscillator circuit in conjunction with other passive components. Now CMOS oscillator circuits are widely used in high-speed applications because they are economical easy to use and take significantly
• Download
  16-Bit Widebus Logic Families in 56-Ball 0.65-mm Pitch Very Thin Fine-Pitch BGA (Rev. B)
  PDF, 895 Kb, Revision: B, File published: May 22, 2002
  TI?s 56-ball MicroStar Jr.E package registered under JEDEC MO-225 has demonstrated through modeling and experimentation that it is an optimal solution for reducing inductance and capacitance improving thermal performance and minimizing board area usage in integrated bus functions. Multiple functions released in the 56-ball MicroStar Jr.E package have superior performance characteristics compa
• Download
  Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A)
  PDF, 105 Kb, Revision: A, File published: Aug 1, 1997
  The spectrum of bus-interface devices with damping resistors or balanced/light output drive currently offered by various logic vendors is confusing at best. Inconsistencies in naming conventions and methods used for implementation make it difficult to identify the best solution for a given application. This report attempts to clarify the issue by looking at several vendors? approaches and discussi
• Download
  Understanding Advanced Bus-Interface Products Design Guide
  PDF, 253 Kb, File published: May 1, 1996
• Download
  Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices
  PDF, 209 Kb, File published: May 10, 2002
  Many telecom and networking applications require that cards be inserted and extracted from a live backplane without interrupting data or damaging components. To achieve this interface terminals of the card must be electrically isolated from the bus system during insertion or extraction from the backplane. To facilitate this Texas Instruments provides bus-interface and logic devices with features
• Download
  How to Select Little Logic (Rev. A)
  PDF, 1.1 Mb, Revision: A, File published: Jul 26, 2016
  TI Little Logic devices are logic-gate devices assembled in a small single- dual- or triple- gate package. Little Logic devices are widely used in portable equipment such as mobile phones MP3 players and notebook computers. Little Logic devices also are used in desktop computers and telecommunications. Little Logic gates are common components for easy PC board routing schematic design and b
• Download
  Migration From 3.3-V To 2.5-V Power Supplies For Logic Devices
  PDF, 115 Kb, File published: Dec 1, 1997
  This application report explores the possibilities for migrating to 3.3-V and 2.5-V power supplies and discusses the implications.Customers are successfully using a wide range of low-voltage 3.3-V logic devices. These devices are within Texas Instruments (TI) advanced low-voltage CMOS (ALVC) crossbar technology (CBT) crossbar technology with integrated diode (CBTD) low-voltage crossbar techn
• Download
  Texas Instruments Little Logic Application Report
  PDF, 359 Kb, File published: Nov 1, 2002
  Portable and consumer electronic systems? needs present greater challenges today than ever before. Engineers strive to design smaller faster lower-cost systems to meet the market demand. Consequently the semiconductor industry faces a growing need to increase operating speed minimize power consumption and reduce packaging size. Texas Instruments manufactures a variety of Little Logic semicond
• Download
  Selecting the Right Level Translation Solution (Rev. A)
  PDF, 313 Kb, Revision: A, File published: Jun 22, 2004
  Supply voltages continue to migrate to lower nodes to support today's low-power high-performance applications. While some devices are capable of running at lower supply nodes others might not have this capability. To haveswitching compatibility between these devices the output of each driver must be compliant with the input of the receiver that it is driving. There are several level-translati
• Download
  Live Insertion
  PDF, 150 Kb, File published: Oct 1, 1996
  Many applications require the ability to exchange modules in electronic systems without removing the supply voltage from the module (live insertion). For example an electronic telephone exchange must always remain operational even during module maintenance and repair. To avoid damaging components additional circuitry modifications are necessary. This document describes in detail the phenomena tha
• Download
  Implications of Slow or Floating CMOS Inputs (Rev. D)
  PDF, 260 Kb, Revision: D, File published: Jun 23, 2016
• Download
  Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)
  PDF, 614 Kb, Revision: C, File published: Dec 2, 2015
• Download
  Semiconductor Packing Material Electrostatic Discharge (ESD) Protection
  PDF, 337 Kb, File published: Jul 8, 2004
  Forty-eight-pin TSSOP components that were packaged using Texas Instruments (TI) standard packing methodology were subjected to electrical discharges between 0.5 and 20 kV as generated by an IEC ESD simulator to determine the level of ISD protection provided by the packing materials. The testing included trays tape and reel and magazines. Additional units were subjected to the same discharge
• Download
  TI IBIS File Creation Validation and Distribution Processes
  PDF, 380 Kb, File published: Aug 29, 2002
  The Input/Output Buffer Information Specification (IBIS) also known as ANSI/EIA-656 has become widely accepted among electronic design automation (EDA) vendors semiconductor vendors and system designers as the format for digital electrical interface data. Because IBIS models do not reveal proprietary internal processes or architectural information semiconductor vendors? support for IBIS con
• Download
  CMOS Power Consumption and CPD Calculation (Rev. B)
  PDF, 89 Kb, Revision: B, File published: Jun 1, 1997
  Reduction of power consumption makes a device more reliable. The need for devices that consume a minimum amount of power was a major driving force behind the development of CMOS technologies. As a result CMOS devices are best known for low power consumption. However for minimizing the power requirements of a board or a system simply knowing that CMOS devices may use less power than equivale
• Download
  Input and Output Characteristics of Digital Integrated Circuits
  PDF, 1.7 Mb, File published: Oct 1, 1996
  This report contains a comprehensive collection of the input and output characteristic curves of typical integrated circuits from various logic families. These curves go beyond the information given in data sheets by providing additional details regarding the characteristics of the components. This knowledge is particularly useful when for example a decision must be made as to which circuit shou
• Download
  Selecting the Right Texas Instruments Signal Switch
  PDF, 769 Kb, File published: Sep 7, 2001
  Texas Instruments offers a wide variety of electronic switches (digital analog bilateral bilateral analog) in a variety of families including CBT CBTLV HC LV and LVC. Depending on the application the right solution may be an analog switch that passes digital signals or vice versa. This application report summarizes the various switching technologies and provides considerations for choosi

Model Line

Manufacturer's Classification

• Semiconductors> Switches and Multiplexers> Analog Switches/Muxes