Datasheet Texas Instruments THS9001
| Manufacturer | Texas Instruments |
| Series | THS9001 |
50-MHz to 750 MHz Cascadable Amplifier
Datasheets
50 MHz to 750 MHz Casadeable Amplifier datasheet
PDF, 1.1 Mb, Revision: C, File published: Dec 2, 2013
Extract from the document
Prices
Status
| THS9001DBVT | THS9001DBVTG4 | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No | No |
Packaging
| THS9001DBVT | THS9001DBVTG4 | |
|---|---|---|
| N | 1 | 2 |
| Pin | 6 | 6 |
| Package Type | DBV | DBV |
| Industry STD Term | SOT-23 | SOT-23 |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | NWL | NWL |
| Width (mm) | 1.6 | 1.6 |
| Length (mm) | 2.9 | 2.9 |
| Thickness (mm) | 1.2 | 1.2 |
| Pitch (mm) | .95 | .95 |
| Max Height (mm) | 1.45 | 1.45 |
| Mechanical Data | Download | Download |
Parametrics
| Parameters / Models | THS9001DBVT | THS9001DBVTG4 |
|---|---|---|
| Current Consumption, mA | 100 | 100 |
| Frequency(Max), MHz | 750 | 750 |
| Frequency(Min), MHz | 50 | 50 |
| Gain(Typ), dB | 15.5 | 15.5 |
| Impedance Match, Ohms | 50 | 50 |
| Noise Figure(Typ), dB | 4 | 4 |
| Number of Channels | 1 | 1 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 |
| Output Enable | No | No |
| Output IP3(Typ), dBm | 36 | 36 |
| P1dB(Typ), dBm | 20.6 | 20.6 |
| Package Group | SOT-23 | SOT-23 |
| Package Size: mm2:W x L, PKG | 6SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) | 6SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) |
| Power Down | No | No |
| Supply(Typ), V | 3-5 | 3-5 |
Eco Plan
| THS9001DBVT | THS9001DBVTG4 | |
|---|---|---|
| RoHS | Compliant | Compliant |
Application Notes
- Driving High-Speed ADCs: Circuit Topologies and System-Level Parameters (Rev. A)PDF, 327 Kb, Revision: A, File published: Sep 10, 2010
This application report discusses the performance-related aspects of passive and active interfaces at the analog input of high-speed pipeline analog-to-digital converters (ADCs). The report simplifies the many possibilities into two main categories: passive and active interface circuits. The first section of the report gives an overview of equivalent models of buffered and unbuffered ADC input cir - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Model Line
Series: THS9001 (2)
Manufacturer's Classification
- Semiconductors> Amplifiers> Special Function Amplifiers> RF Gain Block Amplifiers
