Datasheet Analog Devices ADA4897-1ARJZ-RL

REVISIONS
LTR DESCRIPTION DATE Prepared in accordance with ASME Y14.24 APPROVED Vendor item drawing REV
PAGE
REV
PAGE 18 19 REV STATUS
OF PAGES 20 21 22 REV
PAGE 1 2 PMIC N/A PREPARED BY
RICK OFFICER Original date of drawing
YY-MM-DD CHECKED BY
RAJESH PITHADIA 13-07-02 4 A
REV 5 6 7 8 9 10 11 12 13 14 15 16 17 DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
http://www.landandmaritime.dla.mil/
TITLE
MICROCIRCUIT, LINEAR, LOW POWER OUTPUT
AMPLIFIERS, MONOLITHIC SILICON APPROVED BY
CHARLES F. SAFFLE
SIZE AMSC N/A 3 CODE IDENT. NO. DWG NO. V62/13614 16236
PAGE 1 OF 22
5962-V057-13 1. SCOPE
1.1 Scope. This drawing documents the general requirements of a high performance low power output amplifiers microcircuit, with
an operating temperature range of -55°C to +125°C.
1.2 Vendor Item Drawing Administrative Control Number. The manufacturer’s PIN is the item of identification. The vendor item …

FEATURES Low noise preamplifier
Ultrasound amplifiers
PLL loop filters
High performance ADC drivers
DAC buffers NC 1 8 DISABLE –IN 2 7 +VS +IN 3 6 OUT –VS 4 5 NC Figure 1. 8-Lead SOIC (ADA4897-1)
8 VS = ±5V 7
6
5
4
3
2
1
0 1 10 100 1k 10k 100k 1M 5M FREQUENCY (Hz) Figure 2. Voltage Noise vs. Frequency GENERAL DESCRIPTION
The ADA4896-2/ADA4897-1/ADA4897-2 are unity-gain stable,
low noise, rail-to-rail output, high speed voltage feedback amplifiers
that have a quiescent current of 3 mA. With a 1/f noise of
2.4 nV/√Hz at 10 Hz and a spurious-free dynamic range of −80 dBc
at 2 MHz, the ADA4896-2/ADA4897-1/ADA4897-2 are ideal
solutions in a variety of applications, including ultrasound, low
noise preamplifiers, and drivers of high performance ADCs. The
Analog Devices, Inc., proprietary next-generation SiGe bipolar
process and innovative architecture enable such high performance
amplifiers. …

1 nV/√Hz, Low Power,
Rail-to-Rail Output Amplifiers
ADA4897-1-EP/ADA4897-2-EP FEATURES
Low wideband noise
1 nV/√Hz
2.8 pA/√Hz
Low 1/f noise: 2.4 nV/√Hz at 10 Hz
Low distortion: −115 dBc at 100 kHz, VOUT = 2 V p-p
Low power: 3 mA per amplifier
Low input offset voltage: 0.5 mV maximum
High speed
−3 dB bandwidth: 230 MHz (G = +1)
Slew rate: 120 V/μs
Settling time to 0.1%: 45 ns
Rail-to-rail output
Wide supply range: 3 V to 10 V
Disable feature The ADA4897-1-EP is available in 6-lead SOT-23 package and
the ADA4897-2-EP is available in a 10-lead MSOP package. The
ADA4897-1-EP/ADA4897-2-EP operate over the extended
industrial temperature range of −55°C to +125°C. Additional
application and technical information can be found in the
ADA4897-1/ADA4897-2 data sheet. FUNCTIONAL BLOCK DIAGRAM
ADA4897-1-EP …