Datasheet Analog Devices OP290

REVISIONS
LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Drawing updated to reflect current requirements. -ro 01-03-08 R. MONNIN B Update boilerplate paragraphs to current MIL-PRF-38535 requirements. rrp 11-06-07 C. SAFFLE THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.
REV
SHEET
REV
SHEET
REV STATUS REV B B B B B B B B B OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 PMIC N/A PREPARED BY
RICK C. OFFICER STANDARD
MICROCIRCUIT
DRAWING DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
http://www.dscc.dla.mil CHECKED BY
CHARLES E. BESORE
APPROVED BY THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE AMSC N/A MICHAEL A. FRYE
DRAWING APPROVAL DATE
90-06-08 REVISION LEVEL
B MICROCIRCUIT, LINEAR, PRECISION, LOW
VOLTAGE, MICROPOWER, DUAL OPERATIONAL
AMPLIFIER, MONOLITHIC SILICON …

Precision, Low Power, Micropower
Dual Operational Amplifier
OP290
PIN CONNECTIONS Single-/dual-supply operation: 1.6 V to 36 V, ±0.8 V to ±18 V
True single-supply operation; input and output voltage
Input/output ranges include ground
Low supply current (per amplifier), 20 µA maximum
High output drive, 5 mA minimum
Low input offset voltage, 200 µV typical
High open-loop gain, 400 V/mV minimum
Outstanding PSRR, 5.6 µV/V maximum
Industry standard 8-Mead dual pinout OP290
OUT A 1 8 V+ –IN A 2 7 OUT B +IN A 3 6 –IN B V– 4 5 +IN B B A
– + + – 00327-001 FEATURES Figure 1. PDIP (P-Suffix) GENERAL DESCRIPTION
The OP290 is a high performance micropower dual op amp that
operates from a single supply of 1.6 V to 36 V or from dual
supplies of ±0.8 V to ±18 V. Input voltage range includes the
negative rail allowing the OP290 to accommodate input signals
down to ground in single-supply operation. The OP290 output
swing also includes ground when operating from a single
supply, enabling zero-in, zero-out operation.
The OP290 draws less than 20 μA of quiescent supply current
per amplifier, while being able to deliver over 5 mA of output …

Precision, Low Power, Micropower
Dual Operational Amplifier
OP290
PIN CONNECTIONS Single-/dual-supply operation: 1.6 V to 36 V, ±0.8 V to ±18 V
True single-supply operation; input and output voltage
Input/output ranges include ground
Low supply current (per amplifier), 20 µA maximum
High output drive, 5 mA minimum
Low input offset voltage, 200 µV typical
High open-loop gain, 400 V/mV minimum
Outstanding PSRR, 5.6 µV/V maximum
Industry standard 8-Mead dual pinout OP290
OUT A 1 8 V+ –IN A 2 7 OUT B +IN A 3 6 –IN B V– 4 5 +IN B B A
– + + – 00327-001 FEATURES Figure 1. PDIP (P-Suffix) GENERAL DESCRIPTION
The OP290 is a high performance micropower dual op amp that
operates from a single supply of 1.6 V to 36 V or from dual
supplies of ±0.8 V to ±18 V. Input voltage range includes the
negative rail allowing the OP290 to accommodate input signals
down to ground in single-supply operation. The OP290 output
swing also includes ground when operating from a single
supply, enabling zero-in, zero-out operation.
The OP290 draws less than 20 μA of quiescent supply current
per amplifier, while being able to deliver over 5 mA of output …