Datasheet MAX951EPA - Maxim OP AMP/COMPARATOR/REF, DIP8, 951

Maxim MAX951EPA

Part Number: MAX951EPA

Detailed Description

Manufacturer: Maxim

Description: OP AMP/COMPARATOR/REF, DIP8, 951

Docket:
19-0431; Rev 1; 7/97
Ultra-Low-Power, Single-Supply Op Amp + Comparator + Reference
_______________General Description
The MAX951MAX954 feature combinations of a micropower operational amplifier, comparator, and reference in an 8-pin package.

In the MAX951 and MAX952, the comparator's inverting input is connected to an internal 1.2V ±2% bandgap reference. The MAX953 and MAX954 are offered without an internal reference. The MAX951/MAX952 operate from a single +2.7V to +7V supply with a typical supply current of 7µA, while the MAX953/MAX954 operate from +2.4V to +7V with a 5µA typical supply current. Both the op amp and comparator feature a common-mode input voltage range that extends from the negative supply rail to within 1.6V of the positive rail, as well as output stages that swing rail to rail. The op amps in the MAX951/MAX953 are internally compensated to be unity-gain stable, while the op amps in the MAX952/MAX954 feature 125kHz typical bandwidth, 66V/ms slew rate, and stability

Simulation Model

Specifications:

Amplifier Type: Comparator
Bandwidth: 0.125 MHz
Base Number: 951
IC Generic Number: 951
Input Offset Voltage Max: 4 mV
Logic Function Number: 951
Number of Amplifiers: 1
Number of Pins: 8
Operating Temperature Range: -40°C to +85°C
Operational Amplifier Features: Low Power
Package / Case: DIP
Response Time: 4000 ns
SVHC: No SVHC (18-Jun-2010)
Slew Rate: 66 V/µs
Supply Voltage + Nom: 5 V

Accessories:

Dow Corning - 2265931
Fischer Elektronik - ICK SMD A 8 SA
Fischer Elektronik - WLK 5
Multicomp - 2227MC-08-03-18-F1