PIC24F04KA201 FAMILY
14/20-Pin General Purpose, 16-Bit Flash Microcontrollers
with XLP Technology
Power Management Modes: Analog Features: 10-Bit, up to 9-Channel Analog-to-Digital Converter:
-500 ksps conversion rate
-Conversion available during Sleep and Idle Dual Analog Comparators with Programmable Input/
Output Configuration Charge Time Measurement Unit (CTMU):
-Used for capacitance sensing
-Compatible with mTouchв„ў capacitive sensing
-Time measurement, down to 1 ns resolution
-Delay/pulse generation, down to 1 ns resolution Run – CPU, Flash, SRAM and Peripherals On
Doze – CPU Clock Runs Slower than Peripherals
Idle – CPU Off, Flash, SRAM and Peripherals On
Sleep – CPU, Flash and Peripherals Off and SRAM
On
Deep Sleep – CPU, Flash, SRAM and
Most Peripherals Off
Run mode Currents Down to 8 пЃA Typical
Idle mode Currents Down to 2 пЃA Typical
Deep Sleep mode Currents Down to 20 nA Typical
Watchdog Timer 350 nA, 1.8V Typical High-Performance CPU: Special Microcontroller Features: Modified Harvard Architecture Up to 16 MIPS Operation @ 32 MHz 8 MHz Internal Oscillator with 4x PLL Option and
Multiple Divide Options 17-Bit by 17-Bit Single-Cycle Hardware Multiplier 32-Bit by 16-Bit Hardware Divider 16-Bit x 16-Bit Working Register Array C Compiler Optimized Instruction Set Architecture Operating Voltage Range of 1.8V to 3.6V High-Current Sink/Source (18 mA/18 mA) on All I/O Pins Flash Program Memory:
-Erase/write cycles: 10000 minimum …
