Datasheet Intersil EL5172IY-T7

DATASHEET
EL5172, EL5372 FN7311
Rev 11.00
August 11, 2015 250MHz Differential Line Receivers
The EL5172 and EL5372 are single and triple high
bandwidth amplifiers designed to extract the difference
signal from noisy environments. They are primarily targeted
for applications such as receiving signals from twisted-pair
lines or any application where common mode noise injection
is likely to occur.
The EL5172 and EL5372 are stable for a gain of one and
requires two external resistors to set the voltage gain. Features Differential input range В±2.3V 250MHz 3dB bandwidth 800V/Вµs slew rate 60mA maximum output current Single 5V or dual В±5V supplies The output common mode level is set by the reference pin
(VREF), which has a -3dB bandwidth of over 120MHz.
Generally, this pin is grounded but it can be tied to any
voltage reference. Low power -5mA to 6mA per channel The output can deliver a maximum of В±60mA and is short
circuit protected to withstand a temporary overload
condition. Twisted-pair receivers The EL5172 is available in the 8 Ld SOIC and 8 Ld MSOP
packages and the EL5372 in a 24 Ld QSOP package. Both
are specified for operation over the full -40В°C to +85В°C
temperature range. Pinouts IN+ 2
IN-3 +
-REF 4 8 OUT REF1 1 7 VS-INP1 2 6 VS+ INN1 3 5 EN Differential line receivers VGA over twisted-pair ADSL/HDSL receivers Differential to single-ended amplification Reception of analog signals in a noisy environment 24 NC
+ …