DATASHEET
ISL55033 FN6346
Rev 1.00
June 29, 2015 400MHz Slew Rate Enhanced, Rail-to-Rail Output Gain Block Features The ISL55033 is a triple rail-to-rail output gain block with a
-3dB bandwidth of 400MHz and slew rate of 2350V/Вµs into a
150пЃ— load. The ISL55033 has a fixed gain of +2. The inputs
are capable of sensing ground. The outputs are capable of
swinging to 0.45V to either rail through a 150О© resistor
connected to V+/2. 400MHz -3dB bandwidth 2350V/Вµs typ slew rate, RL = 150О©пЂ to V+/2 Single-supply operation from +3V to +5.5V Rail-to-rail output The ISL55033 is designed for general purpose video
applications. The part includes a fast-acting global
disable/power-down function. Input ground sensing Fast 25ns disable time Pb-free (RoHS compliant) The ISL55033 is available in a 12 Ld TQFN package. Operation
is specified over the -40В°C to +85В°C temperature range. Applications Video amplifiers Set-top boxes Video distribution Pin Configuration 2 IN+_3 3 EN V+_OUTPUT
10 -+ IN+_2 11 -+ 1 12 9 OUTPUT_1 8 OUTPUT_2 7 OUTPUT_3 -+ IN+_1 V+ ISL55033
(12 LD TQFN)
TOP VIEW 4 5 6 GND_IN-(1,2,3) GND_PWR GND_OUTPUT EP EACH CHANNEL
AV = +2 FN6346 Rev 1.00
June 29, 2015 Page 1 of 13 ISL55033 Pin Descriptions
PIN NUMBER PIN NAME EQUIVALENT
CIRCUIT 1 IN+_1 Circuit 1 Amplifier 1 noninverting input 2 IN+_2 Circuit 1 Amplifier 2 noninverting input 3 IN+_3 Circuit 1 Amplifier 3 noninverting input 4 GND_IN-(1, 2, 3) Circuit 4 Common input for amplifiers 1, 2, 3 inverting inputs 5 GND_PWR 6 GND_OUTPUT Circuit 3 Output power supply ground 7 OUTPUT_3 Circuit 3 Amplifier 3 output 8 OUTPUT_2 Circuit 3 Amplifier 2 output DESCRIPTION Circuits 1, 2, 4, 5 Power supply ground. This is also the potential of the exposed metal pad on the package
bottom. 9 OUTPUT_1 Circuit 3 Amplifier 1 output 10 V+_OUTPUT Circuit 3 Output power supply 11 EN Circuit 2 Enable pin with internal pull-down: Logic “1” selects the disabled state; Logic “0” selects the
enabled state 12 V+ Circuits 1, 2, 4 EP EP Circuit 5 Positive power supply
Package’s exposed thermal pad. Connect to GND_PWR.
V+ V+ …
