DATASHEET
X9015 FN8157
Rev 6.00
August 14, 2015 Low Noise, Low Power, Volatile Single Digitally Controlled (XDCPв„ў)
Potentiometer
The Intersil X9015 is a 32 tap potentiometer that is volatile.
The device consists of a string of 31 resistors that can be
programmed to connect the RW/VW wiper output with any of
the nodes between the connecting resistors. The connection
point of the wiper is determined by information
communicated to the device on the 3-wire port. The 3-wire
port changes the tap position by a falling edge on the
increment pin. The direction the wiper moves is determined by
the state of the up/down pin. The wiper position at power up is
Tap #15. Features 32 taps Three-wire up/down serial interface VCC = 2.7V–5V Operating ICC = 50µA max. Standby current = 1µA max. RTOTAL = 10k, 50k Packages 8 Ld SOIC, 8 Ld MSOP The X9015 can be used in a wide variety of applications that
require a digitally controlled variable resistor to set analog
values. Pb-free plus anneal available (RoHS compliant) Pinout
SOIC/MSOP
INC 1 U/D 2 RH/VH 3 VSS X9015 4 8 VCC 7 CS 6 RL/VL 5 RW/VW Block Diagram U/D
INC
CS VCC (Supply Voltage) Control Device Select
(CS) RH/VH 31
30 …
