Datasheet Intersil X9314WS-3T2

DATASHEET
X9314 FN8178
Rev 3.00
July 24, 2014 Terminal Voltages В±5V, 32 Taps, Log Taper Single Digitally Controlled
Potentiometer (XDCPв„ў)
The Intersil X9314 is a solid state nonvolatile potentiometer and
is ideal for digitally controlled resistance trimming. Features Solid State Potentiometer The X9314 is a resistor array composed of 31 resistive
elements. Between each element and at either end are tap
points accessible to the wiper element. The position of the
wiper element is controlled by the CS, U/D, and INC inputs.
The position of the wiper can be stored in nonvolatile
memory and then be recalled upon a subsequent power-up
operation. 32 Taps 10kпЃ—пЂ End to End Resistance Three-Wire Up/Down Serial Interface Wiper Resistance, 40пЃ—пЂ Typical Nonvolatile Storage and Recall on Power-up of Wiper
Position Standby Current < 500ВµA Max (Total Package) The XDCP can be used as a three-terminal potentiometer or
as a two-terminal variable resistor in a wide variety of
applications including control, parameter adjustments, and
signal processing. VCC = 3V to 5.5V Operation 100 Year Data Retention Offered in 8 Ld MSOP and SOIC Packages Pb-Free Plus Anneal Available (RoHS Compliant) Block Diagram
U/D
INC
CS 5-Bit
UP/DOWN
COUNTER 31 VH/RH 30
29 5-Bit …