Datasheet Texas Instruments OPA837IDCKR
| Manufacturer | Texas Instruments |
| Series | OPA837 |
| Part Number | OPA837IDCKR |
Low Power, Precision, 105 MHz, Voltage Feedback Op Amp 5-SC70 -40 to 125
Datasheets
OPA837 Low-Power, Precision, 105-MHz, Voltage-Feedback Op Amp datasheet
PDF, 2.4 Mb, File published: Sep 11, 2017
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 5 |
| Package Type | DCK |
| Industry STD Term | SOT-SC70 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | 16K |
| Width (mm) | 1.25 |
| Length (mm) | 2 |
| Thickness (mm) | .9 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.1 |
| Mechanical Data | Download |
Parametrics
| 2nd Harmonic | 120 dBc |
| 3rd Harmonic | 145 dBc |
| @ MHz | 0.1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | Voltage FB |
| BW @ Acl | 105 MHz |
| CMRR(Min) | 95 dB |
| CMRR(Typ) | 110 dB |
| GBW(Typ) | 50 MHz |
| Input Bias Current(Max) | 520000 pA |
| Iq per channel(Max) | 0.625 mA |
| Iq per channel(Typ) | 0.592 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 0.4 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 50 mA |
| Package Group | SC70 |
| Package Size: mm2:W x L | 5SC70: 4 mm2: 2.1 x 2(SC70) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 105 V/us |
| Total Supply Voltage(Max) | 5.4 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 4.7 nV/rtHz |
| Vn at Flatband(Typ) | 4.7 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.13 mV |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: OPA837DBVEVM
OPA837 Operational Amplifier Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: OPA837DCKEVM
OPA837 Operational Amplifier Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Model Line
Series: OPA837 (4)
- OPA837IDBVR OPA837IDBVT OPA837IDCKR OPA837IDCKT
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)
